From: Dick Olsson Date: Sun, 19 Jul 2020 18:10:40 +0000 Subject: [Buildroot] [PATCH 6/8] configs/qemu_aarch64_sbsa_sbbr_defconfig: new config for SBBR on QEMU SBSA In-Reply-To: <20200719180727.28202-1-hi@senzilla.io> References: <20200719180727.28202-1-hi@senzilla.io> Message-ID: <20200719180727.28202-7-hi@senzilla.io> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net This introduces a configuration for the SBSA reference machine under QEMU that builds firmware that is close to SBBR compliance. It consists of ATF that load EDK2 as BL33 which in turn will load the kernel as EFI stub in ACPI mode. This patch is also introducing a generic SBSA board called aarch64_sbsa that can be shared between SBSA platforms. Signed-off-by: Dick Olsson --- board/aarch64-sbsa/genimage-sbsa.cfg | 25 ++++++++++++++ board/aarch64-sbsa/linux.config | 1 + board/aarch64-sbsa/post-image.sh | 22 ++++++++++++ board/aarch64-sbsa/readme.txt | 28 +++++++++++++++ configs/qemu_aarch64_sbsa_sbbr_defconfig | 44 ++++++++++++++++++++++++ 5 files changed, 120 insertions(+) create mode 100644 board/aarch64-sbsa/genimage-sbsa.cfg create mode 100644 board/aarch64-sbsa/linux.config create mode 100755 board/aarch64-sbsa/post-image.sh create mode 100644 board/aarch64-sbsa/readme.txt create mode 100644 configs/qemu_aarch64_sbsa_sbbr_defconfig diff --git a/board/aarch64-sbsa/genimage-sbsa.cfg b/board/aarch64-sbsa/genimage-sbsa.cfg new file mode 100644 index 0000000000..23280c39a0 --- /dev/null +++ b/board/aarch64-sbsa/genimage-sbsa.cfg @@ -0,0 +1,25 @@ +image efi-part.vfat { + vfat { + file EFI { + image = "efi-part/EFI" + } + } + size = 32M +} + +image disk.img { + + hdimage { + gpt = true + } + + partition boot { + partition-type = 0xEF + image = "efi-part.vfat" + } + + partition root { + partition-type = 0x83 + image = "rootfs.ext2" + } +} diff --git a/board/aarch64-sbsa/linux.config b/board/aarch64-sbsa/linux.config new file mode 100644 index 0000000000..03d553a18d --- /dev/null +++ b/board/aarch64-sbsa/linux.config @@ -0,0 +1 @@ +CONFIG_CMDLINE="root=/dev/vda2 rootwait console=ttyAMA0" diff --git a/board/aarch64-sbsa/post-image.sh b/board/aarch64-sbsa/post-image.sh new file mode 100755 index 0000000000..a9a1eeb227 --- /dev/null +++ b/board/aarch64-sbsa/post-image.sh @@ -0,0 +1,22 @@ +#!/bin/bash + +BOARD_DIR="$(dirname $0)" +EFI_DIR=${BINARIES_DIR}/efi-part/EFI/BOOT + +# Set up the kernel executable according to the UEFI standard. +mkdir -p ${EFI_DIR} && \ +ln -sf ${BINARIES_DIR}/Image ${EFI_DIR}/bootaa64.efi + +function resize_or_link_flash { + if [ -n "${3}" ]; then + dd if=/dev/zero of="${BINARIES_DIR}/${2}" bs=1M count=${3} && \ + dd if="${BINARIES_DIR}/${1}" of="${BINARIES_DIR}/${2}" conv=notrunc || exit 1 + else + ln -srf "${BINARIES_DIR}/${1}" "${BINARIES_DIR}/${2}" || exit 1 + fi +} + +if grep -Eq "^BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM=\"qemu_sbsa\"$" ${BR2_CONFIG}; then + resize_or_link_flash "SBSA_FLASH0.fd" "secureflash.bin" "256" + resize_or_link_flash "SBSA_FLASH1.fd" "flash0.bin" "256" +fi diff --git a/board/aarch64-sbsa/readme.txt b/board/aarch64-sbsa/readme.txt new file mode 100644 index 0000000000..84fe1d3652 --- /dev/null +++ b/board/aarch64-sbsa/readme.txt @@ -0,0 +1,28 @@ +The aarch64-sbsa board is generic and will work for platforms that are +compliant with the Server Base System Architecture (SBSA) specification. +An SBSA platform will need configuration that build firmware compliant with +the Server Base Boot Requirement (SBBR) specification. + +This SBSA board expect SBBR firmware to be packaged in two binaries: + +1. secureflash.bin: The BL1 stage that will be loaded into secure memory +2. flash0.bin: Remaining firmware image packages loaded into non-secure memory + +The following configurations currently provide SBBR firmware: + +- qemu_aarch64_sbsa_sbbr_defconfig: An implementation of SBBR for QEMU SBSA + +Building and booting under QEMU SBSA +==================================== + +$ make qemu_aarch64_sbsa_sbbr_defconfig +$ make +$ qemu-system-aarch64 \ + -M sbsa-ref \ + -cpu cortex-a57 \ + -smp 4 \ + -m 1024 \ + -nographic \ + -drive file=output/images/secureflash.bin,if=pflash,format=raw \ + -drive file=output/images/flash0.bin,if=pflash,format=raw \ + -hda output/images/disk.img diff --git a/configs/qemu_aarch64_sbsa_sbbr_defconfig b/configs/qemu_aarch64_sbsa_sbbr_defconfig new file mode 100644 index 0000000000..05d662fd17 --- /dev/null +++ b/configs/qemu_aarch64_sbsa_sbbr_defconfig @@ -0,0 +1,44 @@ +# Architecture +BR2_aarch64=y + +# Toolchain, required for eudev and grub +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y + +# System +BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y + +## Required tools to create bootable media +BR2_PACKAGE_HOST_GENIMAGE=y + +# Filesystem / image +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="200M" +# BR2_TARGET_ROOTFS_TAR is not set +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/aarch64-sbsa/post-image.sh support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/aarch64-sbsa/genimage-sbsa.cfg" + +# Linux headers same as kernel, a 4.18 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.10" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/aarch64-sbsa/linux.config" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# UEFI firmware +BR2_TARGET_EDK2=y +BR2_TARGET_EDK2_PLATFORM_QEMU_SBSA=y + +# ARM Trusted Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="qemu_sbsa" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y + +# Host tools for genimage +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_MTOOLS=y -- 2.20.1