From: Tom Rini Date: Mon, 27 Jul 2020 16:43:55 -0400 Subject: [PATCH 8/8] Initial Pine64 Pinephone support In-Reply-To: <1562d29f-3063-d6ca-bc84-cb7b57237391@arm.com> References: <20200722141840.143379-1-pbrobinson@gmail.com> <20200722141840.143379-9-pbrobinson@gmail.com> <20200727133048.q4b6yt2gpyevizt4@gilmour.lan> <1562d29f-3063-d6ca-bc84-cb7b57237391@arm.com> Message-ID: <20200727204355.GE6965@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Jul 27, 2020 at 09:08:40PM +0100, Andr? Przywara wrote: > On 27/07/2020 14:49, Peter Robinson wrote: > > Hi, > > thanks for piecing this together. As Maxime mentioned, many options are > not necessary (see below). > > Some options are now set by ARCH_SUNXI, since 48313fe51008. > > >> On Wed, Jul 22, 2020 at 03:18:40PM +0100, Peter Robinson wrote: > >>> The Pine64 Pinephone is a smartphone based on the AllWinner A64 SoC. > >>> It has the following features: > >>> * 2GB LPDDR3 SDRAM > >>> * 5.95 inch 1440x720 HD IPS capacitive touchscreen > >>> * 16GB eMMC, mSD slot > >>> * Quectel EG25 LTE Modem > >>> * Realtek RTL8723CS WiFi/BT > >>> * Front and read cameras > >>> * Accelerometer, gyro, proximity, ambient light, compass sensors > >>> * A USB Type-C, USB Host, DisplayPort alt mode output, 15W 5V 3A Quick Charge, follows USB PD specification > >>> > >>> Signed-off-by: Peter Robinson > >>> --- > >>> arch/arm/Kconfig | 2 +- > >>> configs/pinephone_defconfig | 38 +++++++++++++++++++++++++++++++++++++ > >>> 2 files changed, 39 insertions(+), 1 deletion(-) > >>> create mode 100644 configs/pinephone_defconfig > >>> > >>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > >>> index e16fe03887..636ba26938 100644 > >>> --- a/arch/arm/Kconfig > >>> +++ b/arch/arm/Kconfig > >>> @@ -1004,7 +1004,7 @@ config ARCH_SUNXI > >>> bool "Support sunxi (Allwinner) SoCs" > >>> select BINMAN > >>> select CMD_GPIO > >>> - select CMD_MMC if MMC > >>> +select CMD_MMC if MMC > >> > >> That looks like a typo? > > > > Yes, it is. > > > >>> select CMD_USB if DISTRO_DEFAULTS > >>> select CLK > >>> select DM > >>> diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig > >>> new file mode 100644 > >>> index 0000000000..d5750aa954 > >>> --- /dev/null > >>> +++ b/configs/pinephone_defconfig > >>> @@ -0,0 +1,38 @@ > >>> +CONFIG_ARM=y > >>> +CONFIG_ARCH_SUNXI=y > >>> +CONFIG_SPL=y > >>> +CONFIG_MACH_SUN50I=y > >>> +CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y > >>> +CONFIG_DRAM_CLK=552 > >>> +CONFIG_DRAM_ZQ=3881949 > >>> +CONFIG_NR_DRAM_BANKS=1 > > defaults to 1 now for ARCH_SUNXI So really, one needs to run `make savedefconfig`, copy defconfig to configs/foo_defconfig and then see if there's some changes / settings there that are unexpected. Because if you put a change in there, and then run `make foo_defconfig` and don't see what you want in the new .config file, there's a missing dependency or similar. Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: