From: Sasha Levin Subject: [PATCH AUTOSEL 5.7 08/58] arm64: dts: rockchip: fix rk3368-lion gmac reset gpio Date: Sat, 8 Aug 2020 19:36:34 -0400 Message-ID: <20200808233724.3618168-8-sashal@kernel.org> References: <20200808233724.3618168-1-sashal@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20200808233724.3618168-1-sashal@kernel.org> Sender: stable-owner@vger.kernel.org To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Heiko Stuebner , Sasha Levin , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org List-Id: linux-rockchip.vger.kernel.org From: Heiko Stuebner [ Upstream commit 2300e6dab473e93181cf76e4fe6671aa3d24c57b ] The lion gmac node currently uses opposite active-values for the gmac phy reset pin. The gpio-declaration uses active-high while the separate snps,reset-active-low property marks the pin as active low. While on the kernel side this works ok, other DT users may get confused - as seen with uboot right now. So bring this in line and make both properties match, similar to the other Rockchip board. Fixes: d99a02bcfa81 ("arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200607212909.920575-1-heiko@sntech.de Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index e17311e090826..216aafd90e7f1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -156,7 +156,7 @@ &gmac { pinctrl-0 = <&rgmii_pins>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; tx_delay = <0x10>; rx_delay = <0x10>; status = "okay"; -- 2.25.1