From: Sasha Levin Subject: [PATCH AUTOSEL 5.4 06/40] arm64: dts: rockchip: fix rk3399-puma gmac reset gpio Date: Sat, 8 Aug 2020 19:38:10 -0400 Message-ID: <20200808233844.3618823-6-sashal@kernel.org> References: <20200808233844.3618823-1-sashal@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20200808233844.3618823-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Heiko Stuebner , Sasha Levin , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: linux-rockchip.vger.kernel.org From: Heiko Stuebner [ Upstream commit 8a445086f8af0b7b9bd8d1901d6f306bb154f70d ] The puma gmac node currently uses opposite active-values for the gmac phy reset pin. The gpio-declaration uses active-high while the separate snps,reset-active-low property marks the pin as active low. While on the kernel side this works ok, other DT users may get confused - as seen with uboot right now. So bring this in line and make both properties match, similar to the other Rockchip board. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200603132836.362519-1-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index fb47e4046f4e4..45b86933c6ea0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -157,7 +157,7 @@ &gmac { phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; -- 2.25.1