From: Tom Rini Date: Wed, 12 Aug 2020 08:40:46 -0400 Subject: [PATCH 2/2] board: armltd: Add support for Total Compute platform In-Reply-To: <20200811144604.34293-2-usama.arif@arm.com> References: <20200811144604.34293-1-usama.arif@arm.com> <20200811144604.34293-2-usama.arif@arm.com> Message-ID: <20200812124046.GF20605@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Aug 11, 2020 at 03:46:04PM +0100, Usama Arif wrote: > Total Compute is based on ARM architecture and has > the following features enabled in u-boot: > - PL011 UART > - PL180 MMC > - NOR Flash > - FIT image with Signature > - AVB > > Signed-off-by: Usama Arif [snip] > diff --git a/board/armltd/total_compute/MAINTAINERS b/board/armltd/total_compute/MAINTAINERS > new file mode 100644 > index 0000000000..7c653d469a > --- /dev/null > +++ b/board/armltd/total_compute/MAINTAINERS > @@ -0,0 +1,6 @@ > +TOTAL_COMPUTE BOARD > +M: Usama Arif > +S: Maintained > +F: board/armltd/total_compute/ > +F: include/configs/total_compute.h > +F: configs/total_compute_defconfig Please list the dtb files as well here. > +#define CONFIG_EXTRA_ENV_SETTINGS \ > + "load_addr=0xa0000000\0" \ > + "kernel_addr_r=0x80080000\0" \ > + "initrd_addr_r=0x88000000\0" \ > + "fdt_addr_r=0x83000000\0" \ > + "fdt_high=0xffffffffffffffff\0" \ > + "initrd_high=0xffffffffffffffff\0" > + Disabling fdt/initrd relocation is wrong. Please set bootm_size as needed if fdt/initrd need to be relocated to within a window of memory rather than all available. Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: