From: sbabic at denx.de Date: Tue, 18 Aug 2020 14:33:40 +0200 (CEST) Subject: [PATCH v2 3/3] pico-imx6ul: convert ethernet function to DM_ETH In-Reply-To: <20200731061537.8121-1-wig.cheng@technexion.com> Message-ID: <20200818123340.69AC88221F@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > From: Wig Cheng > - Remove pinmux definition from pico-imx6ul.c > - Enable NET_RANDOM_ETHADDR for temporary solution, because micrel_ksz8xxx > driver does not support DM_ETH yet, so cannot read MAC address directly. > Before enable DM_ETH: > Net: FEC [PRIME] > After enable DM_ETH: > Net: > Warning: using random MAC address - ca:3f:43:8f:67:d4 > eth1: ethernet at 20b4000 > Here is the test commands: > => dhcp > BOOTP broadcast 1 > DHCP client bound to address 10.88.88.94 (139 ms) > *** ERROR: `serverip' not set > Cannot autoload with TFTPGET > => ping 8.8.8.8 > Using ethernet at 20b4000 device > host 8.8.8.8 is alive > Signed-off-by: Wig Cheng > Reviewed-by: Fabio Estevam Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================