From: Marek Vasut Date: Sat, 22 Aug 2020 22:45:36 +0200 Subject: [PATCH] ARM: dts: stm32: Pull UART4 RX high on AV96 Message-ID: <20200822204536.63827-1-marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de There is no dedicated pull resistor on the AV96 UART4 (console UART) pin. In case there is no UART adapter installed on the AV96, the line is floating and can trigger reception of garbage characters, which in turn can abort U-Boot autoboot. Add default pull up to mitigate this problem. Signed-off-by: Marek Vasut Cc: Patrick Delaunay Cc: Patrice Chotard --- arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi index cb92fc9c14..1ae57e1854 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi @@ -75,6 +75,8 @@ }; pins2 { u-boot,dm-pre-reloc; + /delete-property/ bias-disable; + bias-pull-up; }; }; -- 2.28.0