From: Thomas Petazzoni Date: Sun, 23 Aug 2020 23:28:46 +0200 Subject: [Buildroot] [PATCH] package/qt5: needs host gcc >= 5.0 for full C++11 In-Reply-To: <20200823173352.17610-1-yann.morin.1998@free.fr> References: <20200823173352.17610-1-yann.morin.1998@free.fr> Message-ID: <20200823232846.67c6847b@windsurf.home> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Sun, 23 Aug 2020 19:33:52 +0200 "Yann E. MORIN" wrote: > Building qmake requires full C++11, which boils down to gcc >= 5.0, > which is what upstream advertises as a requirement anyway: > > https://doc.qt.io/qt-5.15/supported-platforms.html > > Distribution | Architecture | Compiler > Generic Linux | x86 and x86_64 | GCC (5 or later), ICC 18.x > > Fixes: > http://autobuild.buildroot.org/results/c3e/c3ee971a72f268e72b69a647e8fd00a8cee7dc91/ > http://autobuild.buildroot.org/results/89c/89c9a88b4e1195e952528574263201d4fbc27570/ > [...] > > Signed-off-by: Yann E. MORIN > Cc: Peter Seiderer > Cc: Julien Corjon Thanks for doing this. You had forgotten to update the Config.in comments in pinentry and wireshark, so I did that when applying to master. Long term, I don't think those pinentry and wireshark options should select the Qt5 package, it should probably "depends on" it. I believe if you want the wireshark Qt GUI, it's pretty obvious that you need Qt. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com