From: Tom Rini Date: Wed, 2 Sep 2020 15:57:05 -0400 Subject: [PATCHv4 9/9] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2 In-Reply-To: <20200902173146.105402-10-sebastian.reichel@collabora.com> References: <20200902173146.105402-1-sebastian.reichel@collabora.com> <20200902173146.105402-10-sebastian.reichel@collabora.com> Message-ID: <20200902195705.GW24856@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Sep 02, 2020 at 07:31:46PM +0200, Sebastian Reichel wrote: > GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor > series (GE Bx50). It consists of a carrier PCB used in combination > with a Congatec QMX6 SoM. This adds U-Boot support using device model > everywhere and SPL for memory initialization. > > Proper configuration is provided as 'ge_b1x5v2_defconfig' and the > combined image u-boot-with-spi.imx can be flashed directly to 1024 > byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can > be loaded separately via USB-OTG using e.g. imx_usb. > > Signed-off-by: Sebastian Reichel As I went checking for a good sized gap between kernel and dtb, and I see it's got I was looking for: Reviewed-by: Tom Rini -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: