From: Arnaud Patard (Rtp) Date: Fri, 25 Sep 2020 20:36:57 +0200 Subject: [patch 3/8] RFC: drivers/video/rockchip/rk_edp.c: Change interrupt polarity configuration References: <20200925183654.723338620@rtp-net.org> Message-ID: <20200925183856.447902421@rtp-net.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The linux code is setting polarity configuration to 3 but uboot code is setting it to 1. Change the configuration to match the linux configuration Signed-off-by: Arnaud Patard Index: u-boot/drivers/video/rockchip/rk_edp.c =================================================================== --- u-boot.orig/drivers/video/rockchip/rk_edp.c +++ u-boot/drivers/video/rockchip/rk_edp.c @@ -100,10 +100,13 @@ static void rk_edp_init_refclk(struct rk ®s->dp_reserv2); } +#define INT_POL1 (0x1 << 1) +#define INT_POL0 (0x1 << 0) + static void rk_edp_init_interrupt(struct rk3288_edp *regs) { /* Set interrupt pin assertion polarity as high */ - writel(INT_POL, ®s->int_ctl); + writel(INT_POL0 | INT_POL1, ®s->int_ctl); /* Clear pending registers */ writel(0xff, ®s->common_int_sta_1);