From: Ville =?iso-8859-1?Q?Syrj=E4l=E4?= Subject: Re: [PATCH] drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid() Date: Mon, 28 Sep 2020 16:01:41 +0300 Message-ID: <20200928130141.GV6112@intel.com> References: <20200922210510.156220-1-lyude@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Return-path: Content-Disposition: inline In-Reply-To: <20200922210510.156220-1-lyude@redhat.com> To: Lyude Paul Cc: nouveau@lists.freedesktop.org, Ben Skeggs , David Airlie , Daniel Vetter , "open list:DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS" , open list List-Id: nouveau.vger.kernel.org On Tue, Sep 22, 2020 at 05:05:10PM -0400, Lyude Paul wrote: > While I thought I had this correct (since it actually did reject modes > like I expected during testing), Ville Syrjala from Intel pointed out > that the logic here isn't correct. max_clock refers to the max symbol > rate supported by the encoder, so limiting clock to ds_clock using max() > doesn't make sense. Additionally, we want to check against 6bpc for the > time being since that's the minimum possible bpc here, not the reported > bpc from the connector. See: > > https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html > > For more info. > > So, let's rewrite this using Ville's advice. > > Signed-off-by: Lyude Paul > Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation") > Cc: Ville Syrjälä > Cc: Lyude Paul > Cc: Ben Skeggs > --- > drivers/gpu/drm/nouveau/nouveau_dp.c | 23 +++++++++++++---------- > 1 file changed, 13 insertions(+), 10 deletions(-) > > diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c > index 7b640e05bd4cd..24c81e423d349 100644 > --- a/drivers/gpu/drm/nouveau/nouveau_dp.c > +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c > @@ -231,23 +231,26 @@ nv50_dp_mode_valid(struct drm_connector *connector, > const struct drm_display_mode *mode, > unsigned *out_clock) > { > - const unsigned min_clock = 25000; > - unsigned max_clock, ds_clock, clock; > + const unsigned int min_clock = 25000; > + unsigned int max_clock, ds_clock, clock; > + const u8 bpp = 18; /* 6 bpc */ AFAICS nv50_outp_atomic_check() and nv50_msto_atomic_check() just blindly use connector->display_info.bpc without any fallback logic to lower the bpc. So Ilia's concerns seem well founded. Without that logic I guess you should just use connector->display_info.bpc here as well. > enum drm_mode_status ret; > > if (mode->flags & DRM_MODE_FLAG_INTERLACE && !outp->caps.dp_interlace) > return MODE_NO_INTERLACE; > > max_clock = outp->dp.link_nr * outp->dp.link_bw; > - ds_clock = drm_dp_downstream_max_dotclock(outp->dp.dpcd, > - outp->dp.downstream_ports); > - if (ds_clock) > - max_clock = min(max_clock, ds_clock); > - > - clock = mode->clock * (connector->display_info.bpc * 3) / 10; > - ret = nouveau_conn_mode_clock_valid(mode, min_clock, max_clock, > - &clock); > + clock = mode->clock * bpp / 8; > + if (clock > max_clock) > + return MODE_CLOCK_HIGH; This stuff vs. nouveau_conn_mode_clock_valid() still seems a bit messy. The max_clock you pass to nouveau_conn_mode_clock_valid() is the max symbol clock, but nouveau_conn_mode_clock_valid() checks it against the dotclock. Also only nouveau_conn_mode_clock_valid() has any kind of stereo 3D handling, but AFAICS stereo_allowed is also set for DP? > + > + ds_clock = drm_dp_downstream_max_dotclock(outp->dp.dpcd, outp->dp.downstream_ports); > + if (ds_clock && mode->clock > ds_clock) > + return MODE_CLOCK_HIGH; > + > + ret = nouveau_conn_mode_clock_valid(mode, min_clock, max_clock, &clock); > if (out_clock) > *out_clock = clock; > + > return ret; > } > -- > 2.26.2 -- Ville Syrjälä Intel