From: Billy Tsai Date: Wed, 30 Sep 2020 13:11:13 +0800 Subject: [PATCH] ARM: dts: aspeed-g6: Add sgpiom/sgpios node Message-ID: <20200930051113.32465-1-billy_tsai@aspeedtech.com> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit This commit add two sgpiom and two sgpios node into aspeed-g6.dtsi and change the register range of gpio0 to fix the hardware design. Signed-off-by: Billy Tsai --- arch/arm/boot/dts/aspeed-g6.dtsi | 51 +++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 97ca743363d7..00237daec2a1 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -357,7 +357,7 @@ #gpio-cells = <2>; gpio-controller; compatible = "aspeed,ast2600-gpio"; - reg = <0x1e780000 0x800>; + reg = <0x1e780000 0x500>; interrupts = ; gpio-ranges = <&pinctrl 0 0 208>; ngpios = <208>; @@ -365,6 +365,55 @@ interrupt-controller; #interrupt-cells = <2>; }; + sgpiom0: sgpiom at 1e780500 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-sgpiom"; + reg = <0x1e780500 0x100>; + interrupts = ; + ngpios = <128>; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupt-controller; + bus-frequency = <12000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgpm1_default>; + status = "disabled"; + }; + + sgpiom1: sgpiom at 1e780600 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-sgpiom"; + reg = <0x1e780600 0x100>; + interrupts = ; + ngpios = <80>; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupt-controller; + bus-frequency = <12000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgpm2_default>; + status = "disabled"; + }; + + sgpios0: sgpios at 1e780700 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-sgpios"; + reg = <0x1e780700 0x40>; + interrupts = ; + clocks = <&syscon ASPEED_CLK_APB2>; + }; + + sgpios1: sgpios at 1e780740 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-sgpios"; + reg = <0x1e780740 0x40>; + interrupts = ; + clocks = <&syscon ASPEED_CLK_APB2>; + }; gpio1: gpio at 1e780800 { #gpio-cells = <2>; -- 2.17.1