From: Tom Rini Date: Tue, 13 Oct 2020 09:44:27 -0400 Subject: [PATCH] board: imx: address dd usage in README In-Reply-To: <20201012061443.3157-1-peng.fan@nxp.com> References: <20201012061443.3157-1-peng.fan@nxp.com> Message-ID: <20201013134427.GG14816@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Oct 12, 2020 at 02:14:43PM +0800, Peng Fan wrote: > When using cygwin64 "dd (coreutils) 8.26 Packaged by Cygwin (8.26-2)", > the last not 512bytes aligned data wat cut off and not burned into SD > card. > > Saying the flash.bin size is 1085608 bytes, not 512bytes aligned. It only > burned 1085440 bytes, the leaving 168 bytes were not burnned and cause > boot issue. > > So update README dd command to add "conv=notrunc" > > Signed-off-by: Peng Fan > --- > board/freescale/imx8mm_evk/README | 2 +- > board/freescale/imx8mn_evk/README | 2 +- > board/freescale/imx8mp_evk/README | 2 +- > board/freescale/imx8mq_evk/README | 2 +- > board/freescale/imx8qxp_mek/README | 2 +- > board/freescale/imxrt1020-evk/README | 4 ++-- > board/freescale/imxrt1050-evk/README | 4 ++-- > board/freescale/mx6sabreauto/README | 8 ++++---- > board/freescale/mx6sabresd/README | 12 ++++++------ > board/freescale/mx6ul_14x14_evk/README | 4 ++-- > board/freescale/mx6ullevk/README | 2 +- > 11 files changed, 22 insertions(+), 22 deletions(-) Migration of all of these to doc/board/... is somewhere on the TODO list, right? Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: