From: Tom Rini Date: Thu, 22 Oct 2020 13:32:28 -0400 Subject: [PATCH] ARM: am335x: Add phyBOARD REGOR support In-Reply-To: <20201022145157.35990-1-parthiban@linumiz.com> References: <20201022145157.35990-1-parthiban@linumiz.com> Message-ID: <20201022173228.GM14816@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Oct 22, 2020 at 04:51:57PM +0200, Parthiban Nallathambi wrote: > phyBOARD-REGOR is based on phyCORE AM335x R2 SoM (PCL060). > > CPU : AM335X-GP rev 2.1 > Model: Phytec AM335x phyBOARD-REGOR > DRAM: 512 MiB > NAND: 512 MiB > MMC: OMAP SD/MMC: 0 > eth0: ethernet at 4a100000 > > Working: > - Eth0 > - i2C > - MMC/SD > - NAND > - UART > - USB (host) > > Device trees were taken from Linux mainline: > commit c4d6fe731176 ("Linux 5.9.0") > > Signed-off-by: Parthiban Nallathambi > --- > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/am335x-regor-rdk-u-boot.dtsi | 31 +++++ > arch/arm/dts/am335x-regor-rdk.dts | 24 ++++ > arch/arm/dts/am335x-regor.dtsi | 202 ++++++++++++++++++++++++++++++ > configs/phycore-am335x-r2-regor_defconfig | 88 +++++++++++++ You need to update the relevant for TARGET_PHYCORE_AM335X_R2 MAINTAINERS file to list this new config entry, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: