From: Thomas Petazzoni Date: Tue, 27 Oct 2020 10:18:55 +0100 Subject: [Buildroot] [PATCH] package/lzma-alone: new package In-Reply-To: <20201026213433.4309-1-zajec5@gmail.com> References: <20201026213433.4309-1-zajec5@gmail.com> Message-ID: <20201027101855.6e23b1ca@windsurf.home> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Rafa?, On Mon, 26 Oct 2020 22:34:33 +0100 Rafa? Mi?ecki wrote: > From: Rafa? Mi?ecki > > This new package provides "lzma_alone" host binary based on the original > LZMA SDK. It provides few extra options when compared to the LZMA Utils > project "lzma" binary (already packaged as the "lzma"). > > This tool is required for preparing firmware images for some home > routers with picky bootloaders. It's main advantage is support for > specifying dictionary size and lc/lp/pb LZMA values. > > Broadcom CFE bootloader for MIPS BCM47xx devices is known to fail to > boot images using LZMA compression with dictionary. > Broadcom cferam bootloader for ARM64 BCM4908 devices is known to fail to > boot images without uncompressed size specified. > Broadcom CFE for BCM63xx DSL devices has even different requirements. > > Packaging LZMA SDK "lzma" as "lzma_alone" is how it's handled in the > Arch, Debian and Ubuntu. > > Signed-off-by: Rafa? Mi?ecki I am a bit confused by all the different lzma projects out there. The Debian source package lzma (https://tracker.debian.org/pkg/lzma) produces the lzma, lzma-alone and lzma-dev packages, and its source package is apparently referring to what you suggest to use here. The Buildroot package lzma points to https://tukaani.org/lzma/, which says "Users of LZMA Utils should move to XZ Utils." and where the latest release is from 2008. And then, there is the LZMA SDK at https://www.7-zip.org/sdk.html, where the latest release is 19.00, from 2019, at https://www.7-zip.org/a/lzma1900.7z. This seems to be the same files provided at https://sourceforge.net/projects/sevenzip/files/LZMA%20SDK/, but you're using the lzma922 version. Do you have some clarifications about this (apparent) mess ? > package/lzma-alone/lzma-alone.hash | 1 + > package/lzma-alone/lzma-alone.mk | 23 +++++++++++++++++++++++ > 2 files changed, 24 insertions(+) > create mode 100644 package/lzma-alone/lzma-alone.hash > create mode 100644 package/lzma-alone/lzma-alone.mk We probably want a Config.in.host entry to this package. > +define HOST_LZMA_ALONE_INSTALL_CMDS > + $(INSTALL) -d -m 0755 $(HOST_DIR)/bin Not needed, the following $(INSTALL) -D will create the destination folder for you. > + $(INSTALL) -D -m 0755 $(@D)/CPP/7zip/Bundles/LzmaCon/lzma $(HOST_DIR)/bin/lzma_alone > +endef > + > +$(eval $(host-generic-package)) Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com