From: sbabic at denx.de Date: Mon, 2 Nov 2020 09:08:56 +0100 (CET) Subject: [PATCHv2] mx6: peripheral clock from oscillator In-Reply-To: <20201023191841.15849-1-jorge@foundries.io> Message-ID: <20201102080856.8108F825AA@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > In order to be able to run the I2C bus at 400Khz, the chip errata[1] > recommends that the peripheral clock runs out of the 24MHz oscillator. > Systems running I2C from OP-TEE before Linux executes - for example to > access a Secure Element [2] providing the cryptographic support - expect > this clock to be configured by the bootloader [3]. > [1] IMX6SLCE Rev. 5, 02/2019, ERR007805. > [2] OP-TEE: support for NXP SE05X Plug and Trust (patch on the list). > [3] OP-TEE: check the imx_i2c.c driver (imx6 patch on the list). > Signed-off-by: Jorge Ramirez-Ortiz > Reviewed-by: Fabio Estevam Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================