Content-Type: multipart/mixed; boundary="===============6933045038911739856==" MIME-Version: 1.0 From: James Prestwood Subject: [PATCH 3/4] doc: add APRanges documentation Date: Wed, 04 Nov 2020 08:52:26 -0800 Message-ID: <20201104165227.2782516-3-prestwoj@gmail.com> In-Reply-To: <20201104165227.2782516-1-prestwoj@gmail.com> List-Id: To: iwd@lists.01.org --===============6933045038911739856== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable --- src/iwd.config.rst | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/src/iwd.config.rst b/src/iwd.config.rst index 96774092..5d3cfb3a 100644 --- a/src/iwd.config.rst +++ b/src/iwd.config.rst @@ -67,10 +67,23 @@ The group ``[General]`` contains general settings. obtain the dynamic addresses from the network through the built-in DHCP client. = + This also enables DHCP server when in AP mode when either + [General].APRanges is set or an AP profile is being used. + The network configuration feature is disabled by default. See ``[Network]`` settings for additional settings related to network configuration. = + * - APRanges + - Values: + + Sets the range of IP's used for DHCP server (AP mode). The IP shoul= d be + in prefix notation e.g. aaa.bbb.ccc.ddd/xx. AP's which are started = in a + profile-less configuration will use this pool of IP's to set the AP= 's + interface address as well as default DHCP server options. Each AP w= ill + get a new subnet from the range and clients will be addressed in th= at + subnet to avoid IP conflicts if multiple AP's are started. + * - UseDefaultInterface - Values: true, **false** = -- = 2.26.2 --===============6933045038911739856==--