From: Nicolas Saenz Julienne Date: Thu, 19 Nov 2020 18:48:15 +0100 Subject: [PATCH 1/8] rpi: Add identifier for the new RPi400 In-Reply-To: <20201119174820.7820-1-nsaenzjulienne@suse.de> References: <20201119174820.7820-1-nsaenzjulienne@suse.de> Message-ID: <20201119174820.7820-2-nsaenzjulienne@suse.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The Raspberry Pi Foundation released the new RPi400 which we want to detect, so we can enable Ethernet on it and know the correct device tree file name. So far the Raspberry Pi foundation is using the RPi4b device-tree file to boot RPi400. I see no reason not to do the same as they are completely compatible. Signed-off-by: Nicolas Saenz Julienne --- board/raspberrypi/rpi/rpi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 6b1fa5fc14..ce60a24352 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -157,6 +157,11 @@ static const struct rpi_model rpi_models_new_scheme[] = { DTB_DIR "bcm2711-rpi-4-b.dtb", true, }, + [0x13] = { + "400", + DTB_DIR "bcm2711-rpi-4-b.dtb", + true, + }, }; static const struct rpi_model rpi_models_old_scheme[] = { -- 2.29.2