From: Marek Vasut Date: Tue, 1 Dec 2020 11:29:18 +0100 Subject: [PATCH 2/4] ARM: dts: stm32: Disable SDMMC1 CKIN feedback clock In-Reply-To: <20201201102920.84051-1-marex@denx.de> References: <20201201102920.84051-1-marex@denx.de> Message-ID: <20201201102920.84051-2-marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The STM32MP1 DHCOM SoM can be built with either bus voltage level shifter or without one on the SDMMC1 interface. Because the SDMMC1 interface is limited to 50 MHz and hence SD high-speed anyway, disable the SD feedback clock to permit operation of the same U-Boot image on both SoM with and without voltage level shifter. Signed-off-by: Marek Vasut Cc: Patrice Chotard Cc: Patrick Delaunay --- arch/arm/dts/stm32mp15xx-dhcom.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/arch/arm/dts/stm32mp15xx-dhcom.dtsi index 9049245c5b..dafcce4323 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom.dtsi @@ -333,7 +333,6 @@ disable-wp; st,sig-dir; st,neg-edge; - st,use-ckin; bus-width = <4>; vmmc-supply = <&vdd_sd>; status = "okay"; -- 2.29.2