Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.7 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4B000C8300F for ; Wed, 2 Dec 2020 18:14:11 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id E7D5C22249 for ; Wed, 2 Dec 2020 18:14:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389149AbgLBSOJ (ORCPT ); Wed, 2 Dec 2020 13:14:09 -0500 Received: from retiisi.eu ([95.216.213.190]:33496 "EHLO hillosipuli.retiisi.eu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2387739AbgLBSOI (ORCPT ); Wed, 2 Dec 2020 13:14:08 -0500 Received: from lanttu.localdomain (lanttu-e.localdomain [192.168.1.64]) by hillosipuli.retiisi.eu (Postfix) with ESMTP id D100E634CC0; Wed, 2 Dec 2020 20:08:32 +0200 (EET) From: Sakari Ailus To: linux-media@vger.kernel.org Cc: mchehab@kernel.org Subject: [PATCH 25/38] ccs-pll: Check for derating and overrating, support non-derating sensors Date: Wed, 2 Dec 2020 20:06:28 +0200 Message-Id: <20201202180641.17401-26-sakari.ailus@linux.intel.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20201202180641.17401-1-sakari.ailus@linux.intel.com> References: <20201202180641.17401-1-sakari.ailus@linux.intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Some sensors support derating (VT domain speed faster than OP) or overrating (VT domain speed slower than OP). While this was supported for the driver, the hardware support for the feature was never verified. Do that now, and for those devices without that support, VT and OP speeds have to match. Signed-off-by: Sakari Ailus --- drivers/media/i2c/ccs-pll.c | 84 +++++++++++++++++++++----------- drivers/media/i2c/ccs-pll.h | 2 + drivers/media/i2c/ccs/ccs-core.c | 7 +++ 3 files changed, 64 insertions(+), 29 deletions(-) diff --git a/drivers/media/i2c/ccs-pll.c b/drivers/media/i2c/ccs-pll.c index 3d43e737155f..96eb71f16c81 100644 --- a/drivers/media/i2c/ccs-pll.c +++ b/drivers/media/i2c/ccs-pll.c @@ -142,6 +142,18 @@ static int check_all_bounds(struct device *dev, lim->vt_bk.max_pix_clk_freq_hz, "vt_pix_clk_freq_hz"); + if (!(pll->flags & CCS_PLL_FLAG_FIFO_DERATING) && + pll->pixel_rate_pixel_array > pll->pixel_rate_csi) { + dev_dbg(dev, "device does not support derating\n"); + return -EINVAL; + } + + if (!(pll->flags & CCS_PLL_FLAG_FIFO_OVERRATING) && + pll->pixel_rate_pixel_array < pll->pixel_rate_csi) { + dev_dbg(dev, "device does not support overrating\n"); + return -EINVAL; + } + return rval; } @@ -163,37 +175,51 @@ __ccs_pll_calculate_vt(struct device *dev, const struct ccs_pll_limits *lim, uint32_t min_sys_div, max_sys_div; /* - * Some sensors perform analogue binning and some do this - * digitally. The ones doing this digitally can be roughly be - * found out using this formula. The ones doing this digitally - * should run at higher clock rate, so smaller divisor is used - * on video timing side. + * Find out whether a sensor supports derating. If it does not, VT and + * OP domains are required to run at the same pixel rate. */ - if (lim->min_line_length_pck_bin > lim->min_line_length_pck - / pll->binning_horizontal) - vt_op_binning_div = pll->binning_horizontal; - else - vt_op_binning_div = 1; - dev_dbg(dev, "vt_op_binning_div: %u\n", vt_op_binning_div); + if (!(pll->flags & CCS_PLL_FLAG_FIFO_DERATING)) { + min_vt_div = + op_pll_bk->sys_clk_div * op_pll_bk->pix_clk_div + * pll->vt_lanes * phy_const + / pll->op_lanes / PHY_CONST_DIV; + } else { + /* + * Some sensors perform analogue binning and some do this + * digitally. The ones doing this digitally can be roughly be + * found out using this formula. The ones doing this digitally + * should run at higher clock rate, so smaller divisor is used + * on video timing side. + */ + if (lim->min_line_length_pck_bin > lim->min_line_length_pck + / pll->binning_horizontal) + vt_op_binning_div = pll->binning_horizontal; + else + vt_op_binning_div = 1; + dev_dbg(dev, "vt_op_binning_div: %u\n", vt_op_binning_div); - /* - * Profile 2 supports vt_pix_clk_div E [4, 10] - * - * Horizontal binning can be used as a base for difference in - * divisors. One must make sure that horizontal blanking is - * enough to accommodate the CSI-2 sync codes. - * - * Take scaling factor and number of VT lanes into account as well. - * - * Find absolute limits for the factor of vt divider. - */ - dev_dbg(dev, "scale_m: %u\n", pll->scale_m); - min_vt_div = DIV_ROUND_UP(pll->bits_per_pixel * op_pll_bk->sys_clk_div - * pll->scale_n * pll->vt_lanes * phy_const, - (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ? - pll->csi2.lanes : 1) - * vt_op_binning_div * pll->scale_m - * PHY_CONST_DIV); + /* + * Profile 2 supports vt_pix_clk_div E [4, 10] + * + * Horizontal binning can be used as a base for difference in + * divisors. One must make sure that horizontal blanking is + * enough to accommodate the CSI-2 sync codes. + * + * Take scaling factor and number of VT lanes into account as well. + * + * Find absolute limits for the factor of vt divider. + */ + dev_dbg(dev, "scale_m: %u\n", pll->scale_m); + min_vt_div = + DIV_ROUND_UP(pll->bits_per_pixel + * op_pll_bk->sys_clk_div * pll->scale_n + * pll->vt_lanes * phy_const, + (pll->flags & + CCS_PLL_FLAG_LANE_SPEED_MODEL ? + pll->csi2.lanes : 1) + * vt_op_binning_div * pll->scale_m + * PHY_CONST_DIV); + } /* Find smallest and biggest allowed vt divisor. */ dev_dbg(dev, "min_vt_div: %u\n", min_vt_div); diff --git a/drivers/media/i2c/ccs-pll.h b/drivers/media/i2c/ccs-pll.h index 1b5c20736fe8..03c2428c76cd 100644 --- a/drivers/media/i2c/ccs-pll.h +++ b/drivers/media/i2c/ccs-pll.h @@ -27,6 +27,8 @@ #define CCS_PLL_FLAG_LINK_DECOUPLED BIT(3) #define CCS_PLL_FLAG_EXT_IP_PLL_DIVIDER BIT(4) #define CCS_PLL_FLAG_FLEXIBLE_OP_PIX_CLK_DIV BIT(5) +#define CCS_PLL_FLAG_FIFO_DERATING BIT(6) +#define CCS_PLL_FLAG_FIFO_OVERRATING BIT(7) /** * struct ccs_pll_branch_fr - CCS PLL configuration (front) diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c index 95d274834f0e..849c1001e3cc 100644 --- a/drivers/media/i2c/ccs/ccs-core.c +++ b/drivers/media/i2c/ccs/ccs-core.c @@ -3225,6 +3225,13 @@ static int ccs_probe(struct i2c_client *client) if (CCS_LIM(sensor, CLOCK_TREE_PLL_CAPABILITY) & CCS_CLOCK_TREE_PLL_CAPABILITY_FLEXIBLE_OP_PIX_CLK_DIV) sensor->pll.flags |= CCS_PLL_FLAG_FLEXIBLE_OP_PIX_CLK_DIV; + if (CCS_LIM(sensor, FIFO_SUPPORT_CAPABILITY) & + CCS_FIFO_SUPPORT_CAPABILITY_DERATING) + sensor->pll.flags |= CCS_PLL_FLAG_FIFO_DERATING; + if (CCS_LIM(sensor, FIFO_SUPPORT_CAPABILITY) & + CCS_FIFO_SUPPORT_CAPABILITY_DERATING_OVERRATING) + sensor->pll.flags |= CCS_PLL_FLAG_FIFO_DERATING | + CCS_PLL_FLAG_FIFO_OVERRATING; sensor->pll.op_bits_per_lane = CCS_LIM(sensor, OP_BITS_PER_LANE); sensor->pll.ext_clk_freq_hz = sensor->hwcfg.ext_clk; sensor->pll.scale_n = CCS_LIM(sensor, SCALER_N_MIN); -- 2.27.0