From: sbabic at denx.de Date: Tue, 8 Dec 2020 08:58:42 +0100 (CET) Subject: [PATCH v1 2/7] board: toradex: add apalis-imx8x 2gb wb it v1.1a module support In-Reply-To: <20201022082143.21170-3-igor.opaniuk@gmail.com> Message-ID: <20201208075842.0EA9A825C2@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > From: Igor Opaniuk > This commit adds initial support for the Toradex Apalis iMX8X 2GB WB > IT V1.1A System on Module support [1]. > Boot log: > U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) > CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C > DRAM: 2 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > Loading Environment from MMC... OK > In: serial at 5a070000 > Out: serial at 5a070000 > Err: serial at 5a070000 > Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, > Serial# 06617018 > Net: eth0: ethernet at 5b040000 [PRIME] > Hit any key to stop autoboot: 0 > Functionality wise the following is known to be working: > - eMMC and MMC/SD card > - Ethernet (*) > - GPIOs > - I2C > Unfortunately, there is no USB functionality for the i.MX 8QXP as of > yet. > * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) > ETH PHY encounters bring up problems after reset, this will be fixed > soon on SCU FW side. > [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x > Signed-off-by: Igor Opaniuk > Acked-by: Oleksandr Suvorov Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================