Content-Type: multipart/mixed; boundary="===============5846803340000906105==" MIME-Version: 1.0 From: Bongsu Jeon To: linux-nfc@lists.01.org Subject: [linux-nfc] [PATCH v2 net-next 0/2] nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING Date: Tue, 08 Dec 2020 23:10:10 +0900 Message-ID: <20201208141012.6033-1-bongsu.jeon@samsung.com> --===============5846803340000906105== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable From: Bongsu Jeon For stable Samsung's I2C interrupt handling, I changed the interrupt = trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed = the hard coded interrupt trigger type in the i2c module for the flexible = control. 1/2 is the changed dt binding for the edge rising trigger. 2/2 is to remove the hard coded interrupt trigger type in the i2c module. ChangeLog: v2: 2/2 - remove the hard coded interrupt trigger type. Bongsu Jeon (2): dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c module .../devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml | 2 +- drivers/nfc/s3fwrn5/i2c.c | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-) -- = 2.17.1 --===============5846803340000906105==--