From: Michael Walle Date: Wed, 9 Dec 2020 10:53:26 +0100 Subject: [PATCH 2/2] board: kontron: disable flash unlock all In-Reply-To: <20201209095326.18514-1-michael@walle.cc> References: <20201209095326.18514-1-michael@walle.cc> Message-ID: <20201209095326.18514-2-michael@walle.cc> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Although the status register is protected by the hardware write protection, there is a hardware jumper to disable that hardware write protection. Thus if a user would set this jumper any u-boot start would disable the write protection altogether. Circumvent that by not disabling the write protection in the first place. Signed-off-by: Michael Walle --- configs/kontron_sl28_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index c1a096799c..12720f343e 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -73,6 +73,7 @@ CONFIG_MMC_HS400_SUPPORT=y CONFIG_FSL_ESDHC=y CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y CONFIG_DM_SPI_FLASH=y +# CONFIG_SPI_FLASH_UNLOCK_ALL is not set CONFIG_SPI_FLASH_WINBOND=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y -- 2.20.1