From: Dick Olsson Date: Fri, 18 Dec 2020 20:27:38 +0000 Subject: [Buildroot] [PATCH v3 06/11] configs/pc_x86_64_defconfig: build the EDK2 firmware from source In-Reply-To: <20201218202646.1060123-1-hi@senzilla.io> References: <20201218202646.1060123-1-hi@senzilla.io> Message-ID: <20201218202646.1060123-7-hi@senzilla.io> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Prior to this, you had to manually download a pre-built EDK2 flash device image (OVMF_CODE.fd) in order to boot this configuration with QEMU. Now, the configuration is building EDK2 from source. Signed-off-by: Dick Olsson --- board/pc/readme.txt | 9 ++++----- configs/pc_x86_64_efi_defconfig | 2 ++ 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/board/pc/readme.txt b/board/pc/readme.txt index 41aec50d36..c06ffb0a51 100644 --- a/board/pc/readme.txt +++ b/board/pc/readme.txt @@ -61,12 +61,11 @@ Run the emulation with: qemu-system-x86_64 \ -M pc \ - -bios \ + -drive file=output/images/OVMF_CODE.fd,if=pflash,format=raw \ + -drive file=output/images/OVMF_VARS.fd,if=pflash,format=raw \ -drive file=output/images/disk.img,if=virtio,format=raw \ -net nic,model=virtio \ -net user -Note that needs to point to a valid x86_64 UEFI -firmware image for qemu. It may be provided by your distribution as a -edk2 or OVMF package, in path such as -/usr/share/edk2/ovmf/OVMF_CODE.fd . +Note that output/images/OVMF_*.fd are the flash device files built by +the EDK2 package. diff --git a/configs/pc_x86_64_efi_defconfig b/configs/pc_x86_64_efi_defconfig index 984fc8f92f..1680cda9bb 100644 --- a/configs/pc_x86_64_efi_defconfig +++ b/configs/pc_x86_64_efi_defconfig @@ -14,6 +14,8 @@ BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y # Bootloader +BR2_TARGET_EDK2=y +BR2_TARGET_EDK2_PLATFORM_OVMF_X64=y BR2_TARGET_GRUB2=y BR2_TARGET_GRUB2_X86_64_EFI=y -- 2.25.1