From: sbabic at denx.de Date: Sat, 26 Dec 2020 16:54:19 +0100 (CET) Subject: [PATCH] imx8mm_beacon: Enable HS400 on MMC controller In-Reply-To: <20201205005943.231398-1-aford173@gmail.com> Message-ID: <20201226155419.3D94182639@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > The i.MX8MM is capable of HS400. Enable it in both > U-Boot and SPL for faster throughput. > Signed-off-by: Adam Ford > diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig > index c5d331f617..49d5453078 100644 > --- a/configs/imx8mm_beacon_defconfig > +++ b/configs/imx8mm_beacon_defconfig > @@ -70,6 +70,13 @@ CONFIG_DM_I2C=y > CONFIG_SYS_I2C_MXC=y > CONFIG_DM_MMC=y > CONFIG_SUPPORT_EMMC_BOOT=y > +CONFIG_MMC_IO_VOLTAGE=y > +CONFIG_SPL_MMC_IO_VOLTAGE=y > +CONFIG_MMC_UHS_SUPPORT=y > +CONFIG_SPL_MMC_UHS_SUPPORT=y > +CONFIG_MMC_HS400_ES_SUPPORT=y > +CONFIG_MMC_HS400_SUPPORT=y > +CONFIG_SPL_MMC_HS400_SUPPORT=y > CONFIG_FSL_USDHC=y > CONFIG_PHYLIB=y > CONFIG_PHY_ATHEROS=y Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================