From: Adam Ford Date: Wed, 30 Dec 2020 08:14:20 -0600 Subject: [PATCH 2/2] ARM: dts: imx8mm-beacon: add UHS and HS400/HS400ES properties In-Reply-To: <20201230141421.2860212-1-aford173@gmail.com> References: <20201230141421.2860212-1-aford173@gmail.com> Message-ID: <20201230141421.2860212-2-aford173@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de i.MX8M Mini can provide support for high speed grades in the usdhc controllers. On the imx8mm-beacon-kit, the sdhc2 hosts a microSD card, and sdhc3 hosts an eMMC capable of HS400ES. In order to toggle this mode in SPL, the reg_usdhc2_vmmc must be available in SPL. Add all these flags to imx8mm-beacon-kit-u-boot.dtsi Suggested-by: Andrey Zhizhikin Signed-off-by: Adam Ford diff --git a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi index 6d80a529ae..d7da29c592 100644 --- a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi @@ -38,6 +38,7 @@ }; ®_usdhc2_vmmc { + u-boot,dm-spl; u-boot,off-on-delay-us = <20000>; }; @@ -112,10 +113,14 @@ &usdhc2 { u-boot,dm-spl; + sd-uhs-sdr104; + sd-uhs-ddr50; }; &usdhc3 { u-boot,dm-spl; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; }; &i2c1 { -- 2.25.1