From: Yann E. MORIN Date: Thu, 14 Jan 2021 22:31:54 +0100 Subject: [Buildroot] [PATCH v2] configs/kontron_smarc_sal28: enable u-boot In-Reply-To: <20210113190948.373-1-michael@walle.cc> References: <20210113190948.373-1-michael@walle.cc> Message-ID: <20210114213154.GB2375@scaer> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Michael, All, On 2021-01-13 20:09 +0100, Michael Walle spake thusly: > Enable building of the bootloader and integrate it into the resulting > image. > > Signed-off-by: Michael Walle Both applied to master, thanks. Regards, Yann E. MORIN. > --- > changes since v1: > - added BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y, thanks Heiko > > board/kontron/smarc-sal28/genimage.cfg | 6 ++++++ > board/kontron/smarc-sal28/readme.txt | 15 +++++++++++++++ > configs/kontron_smarc_sal28_defconfig | 10 ++++++++++ > 3 files changed, 31 insertions(+) > > diff --git a/board/kontron/smarc-sal28/genimage.cfg b/board/kontron/smarc-sal28/genimage.cfg > index 9ef37de757..d75234d997 100644 > --- a/board/kontron/smarc-sal28/genimage.cfg > +++ b/board/kontron/smarc-sal28/genimage.cfg > @@ -3,6 +3,12 @@ image sdcard-emmc.img { > gpt = true > } > > + partition u-boot { > + offset = 1M > + in-partition-table = "no" > + image = "u-boot.rom" > + } > + > partition rootfs { > offset = 2M > image = rootfs.ext4 > diff --git a/board/kontron/smarc-sal28/readme.txt b/board/kontron/smarc-sal28/readme.txt > index 2047f09b64..bdf2258b59 100644 > --- a/board/kontron/smarc-sal28/readme.txt > +++ b/board/kontron/smarc-sal28/readme.txt > @@ -71,3 +71,18 @@ You will see something like this at boot time: > [ 4.563565] GPT:Alternate GPT header not at the end of the disk. > [ 4.569596] GPT:266272 != 7864319 > [ 4.572925] GPT: Use GNU Parted to correct GPT errors. > + > +Updating the bootloader > +======================= > + > +Buildroot will automatically build the u-boot bootloader. The resulting > +image is called u-boot.rom and you can find it in the images/ directory. > + > +To update the bootloader on the board you could either copy it to an > +USB thumb drive or you could put it on a TFTP server. The following > +example assumes you have the bootloader image copied to the root of > +a thumb drive: > + > + # usb start > + # load usb 0:1 $loadaddr u-boot.rom > + # sf probe 0 && sf update $fileaddr 0x210000 $filesize > diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig > index b88f1aef4f..a8412b9c38 100644 > --- a/configs/kontron_smarc_sal28_defconfig > +++ b/configs/kontron_smarc_sal28_defconfig > @@ -19,5 +19,15 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > BR2_TARGET_ROOTFS_EXT2=y > BR2_TARGET_ROOTFS_EXT2_4=y > BR2_TARGET_ROOTFS_EXT2_SIZE="128M" > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01" > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28" > +BR2_TARGET_UBOOT_NEEDS_DTC=y > +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y > +# BR2_TARGET_UBOOT_FORMAT_BIN is not set > +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y > +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.rom" > BR2_PACKAGE_HOST_GENIMAGE=y > BR2_PACKAGE_HOST_UBOOT_TOOLS=y > -- > 2.20.1 > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'