From: Vladimir Oltean Date: Tue, 16 Feb 2021 23:19:29 +0200 Subject: [PATCH v5 2/9] net: phy: fixed: support speeds of 2500 and 10000 In-Reply-To: <20210216211936.3291988-1-olteanv@gmail.com> References: <20210216211936.3291988-1-olteanv@gmail.com> Message-ID: <20210216211936.3291988-3-olteanv@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Vladimir Oltean Unlike the Linux fixed PHY driver, the one in U-Boot does not attempt to emulate the clause 22 register set of a gigabit copper PHY driver through the swphy framework. Therefore, the limitation of being unable to support speeds higher than gigabit in fixed-link does not apply to the U-Boot fixed PHY driver. This makes the fixed-link U-Boot implementation more similar to the one from phylink, which can work with any valid link speed. Signed-off-by: Vladimir Oltean Reviewed-by: Claudiu Manoil --- Changes in v5: None. Changes in v4: Patch is new. drivers/net/phy/fixed.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index d117a50719a2..ae6b44bec81c 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -25,7 +25,8 @@ static int fixedphy_of_init(struct phy_device *phydev) return -EINVAL; val = ofnode_read_u32_default(node, "speed", 0); - if (val != SPEED_10 && val != SPEED_100 && val != SPEED_1000) { + if (val != SPEED_10 && val != SPEED_100 && val != SPEED_1000 && + val != SPEED_2500 && val != SPEED_10000) { printf("ERROR: no/invalid speed given in fixed-link node!"); return -EINVAL; } -- 2.25.1