From: Vladimir Oltean Date: Tue, 16 Feb 2021 23:19:35 +0200 Subject: [PATCH v5 8/9] arm: dts: ls1028a: add Ethernet switch node and dependencies In-Reply-To: <20210216211936.3291988-1-olteanv@gmail.com> References: <20210216211936.3291988-1-olteanv@gmail.com> Message-ID: <20210216211936.3291988-9-olteanv@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Alex Marginean The definition follows the DSA binding in kernel and describes the switch, its ports and PHYs. The switch node has the same structure as in Linux and this patch enables it (and relevant ports) for the LS1028A RDB board. ENETC PF6 is the 2nd Eth controller linked to the switch on LS1028A, it is not used in U-Boot and was disabled. Ethernet port aliases were also added to better manage the multitude of ports available now. Signed-off-by: Alex Marginean Signed-off-by: Claudiu Manoil Signed-off-by: Vladimir Oltean Reviewed-by: Michael Walle --- v5: none. v4: none. v3: Added a comment denoting the PHY model present on the RDB. v2: Switch node structure defined in dtsi now consistent with the Linux switch node definition. Moved aliases from dtsi to the RDB DTS to minimize impact on other boards (and for improved flexibility). arch/arm/dts/fsl-ls1028a-rdb.dts | 64 ++++++++++++++++++++++++++++++++ arch/arm/dts/fsl-ls1028a.dtsi | 55 ++++++++++++++++++++++++++- 2 files changed, 118 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts index 85b4815b2ed7..3432fca35269 100644 --- a/arch/arm/dts/fsl-ls1028a-rdb.dts +++ b/arch/arm/dts/fsl-ls1028a-rdb.dts @@ -15,6 +15,12 @@ compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; aliases { spi0 = &fspi; + eth0 = &enetc0; + eth1 = &enetc2; + eth2 = &mscc_felix_port0; + eth3 = &mscc_felix_port1; + eth4 = &mscc_felix_port2; + eth5 = &mscc_felix_port3; }; }; @@ -131,9 +137,67 @@ phy-handle = <&rdb_phy0>; }; +&enetc2 { + status = "okay"; +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + label = "swp0"; + phy-handle = <&sw_phy0>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port1 { + label = "swp1"; + phy-handle = <&sw_phy1>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port2 { + label = "swp2"; + phy-handle = <&sw_phy2>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port3 { + label = "swp3"; + phy-handle = <&sw_phy3>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; + &mdio0 { status = "okay"; rdb_phy0: phy at 2 { reg = <2>; }; + + /* VSC8514 QSGMII PHY */ + sw_phy0: phy at 10 { + reg = <0x10>; + }; + + sw_phy1: phy at 11 { + reg = <0x11>; + }; + + sw_phy2: phy at 12 { + reg = <0x12>; + }; + + sw_phy3: phy at 13 { + reg = <0x13>; + }; }; diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index 5171bf28c79e..22d107d959de 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -151,9 +151,62 @@ reg = <0x000300 0 0 0 0>; status = "disabled"; }; + + mscc_felix: pci at 0,5 { + reg = <0x000500 0 0 0 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mscc_felix_port0: port at 0 { + reg = <0>; + status = "disabled"; + }; + + mscc_felix_port1: port at 1 { + reg = <1>; + status = "disabled"; + }; + + mscc_felix_port2: port at 2 { + reg = <2>; + status = "disabled"; + }; + + mscc_felix_port3: port at 3 { + reg = <3>; + status = "disabled"; + }; + + mscc_felix_port4: port at 4 { + reg = <4>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + mscc_felix_port5: port at 5 { + reg = <5>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + enetc6: pci at 0,6 { reg = <0x000600 0 0 0 0>; - status = "okay"; + status = "disabled"; phy-mode = "internal"; }; }; -- 2.25.1