From: Tero Kristo Date: Wed, 5 May 2021 20:55:30 +0300 Subject: [PATCHv3 16/26] tools: k3_fit_atf: add DM binary to the FIT image In-Reply-To: <20210505175540.15006-1-kristo@kernel.org> References: <20210505175540.15006-1-kristo@kernel.org> Message-ID: <20210505175540.15006-17-kristo@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Tero Kristo Add DM (device manager) firmware image to the fit image that is loaded by R5 SPL. This is needed with the HSM rearch where the firmware allocation has been changed slightly. Signed-off-by: Tero Kristo Signed-off-by: Tero Kristo --- arch/arm/mach-k3/config.mk | 4 ++++ tools/k3_fit_atf.sh | 19 ++++++++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk index 41fee2b5a1..503ece4520 100644 --- a/arch/arm/mach-k3/config.mk +++ b/arch/arm/mach-k3/config.mk @@ -49,6 +49,10 @@ endif ifdef CONFIG_ARM64 +ifeq ($(CONFIG_SOC_K3_J721E),) +export DM := /dev/null +endif + ifeq ($(CONFIG_TI_SECURE_DEVICE),y) SPL_ITS := u-boot-spl-k3_HS.its $(SPL_ITS): export IS_HS=1 diff --git a/tools/k3_fit_atf.sh b/tools/k3_fit_atf.sh index 4e9f69c087..c0940a2fcc 100755 --- a/tools/k3_fit_atf.sh +++ b/tools/k3_fit_atf.sh @@ -21,6 +21,13 @@ if [ ! -f $TEE ]; then TEE=/dev/null fi +[ -z "$DM" ] && DM="dm.bin" + +if [ ! -e $DM ]; then + echo "WARNING DM file $DM NOT found, resulting might be non-functional" >&2 + DM=/dev/null +fi + if [ ! -z "$IS_HS" ]; then HS_APPEND=_HS fi @@ -53,6 +60,16 @@ cat << __HEADER_EOF load = <0x9e800000>; entry = <0x9e800000>; }; + dm { + description = "DM binary"; + data = /incbin/("$DM"); + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0xa0000000>; + entry = <0xa0000000>; + }; spl { description = "SPL (64-bit)"; data = /incbin/("spl/u-boot-spl-nodtb.bin$HS_APPEND"); @@ -91,7 +108,7 @@ do $(basename $dtname) { description = "$(basename $dtname .dtb)"; firmware = "atf"; - loadables = "tee", "spl"; + loadables = "tee", "dm", "spl"; fdt = "$(basename $dtname)"; }; __CONF_SECTION_EOF -- 2.17.1