From: Tero Kristo Date: Tue, 11 May 2021 11:31:04 +0300 Subject: [PATCHv4 26/26] arm: dts: k3-j72xx: correct MCU timer1 frequency In-Reply-To: <20210511083104.10868-1-kristo@kernel.org> References: <20210511083104.10868-1-kristo@kernel.org> Message-ID: <20210511083104.10868-27-kristo@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de MCU timer1 is used as the tick timer for MCU R5 SPL, and the clock-frequency defined in DT appears to be incorrect at the moment. Actual clock source for the timer is MCU_SYSCLK0 / 4 which is 250MHz. Earlier setup of 25MHz went unnoticed, as there was a separate issue with omap-timer, which caused an error to the clock by a factor of 8 with j7 devices. This problem surfaced once the omap-timer was fixed. Signed-off-by: Tero Kristo --- arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi | 2 +- arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi index bd037be350..c3aae65b39 100644 --- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi @@ -33,7 +33,7 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x40400000 0x0 0x80>; ti,timer-alwon; - clock-frequency = <25000000>; + clock-frequency = <250000000>; u-boot,dm-spl; }; diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi index 3384ed9f3a..1135de5a92 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi @@ -46,7 +46,7 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x40400000 0x0 0x80>; ti,timer-alwon; - clock-frequency = <25000000>; + clock-frequency = <250000000>; u-boot,dm-spl; }; -- 2.17.1