From: Giulio Benetti Date: Sun, 16 May 2021 23:57:00 +0200 Subject: [PATCH 1/3] ARM: dts: imxrt1050-evk: move all u-boot, dm-spl to imxrt1050-evk-u-boot.dtsi file Message-ID: <20210516215702.340497-1-giulio.benetti@benettiengineering.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de At the moment a lot of u-boot,dm-spl properties are present in board .dts file but this is not correct since u-boot,dm-spl property is u-boot specific and must be listed into the separate imrt1050-evk-u-boot.dtsi file. So let's move every u-boot,dm-spl property present in imxrt1050-evk.dts to imxrt1050-evk-u-boot.dtsi file. Signed-off-by: Giulio Benetti --- arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 38 ++++++++++++++++++++++++++ arch/arm/dts/imxrt1050.dtsi | 13 --------- 2 files changed, 38 insertions(+), 13 deletions(-) diff --git a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi index a4b50f0bb2..3168c2df2c 100644 --- a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi +++ b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi @@ -8,6 +8,42 @@ chosen { u-boot,dm-spl; }; + + clocks { + u-boot,dm-spl; + }; + + soc { + u-boot,dm-spl; + }; +}; + +&osc { + u-boot,dm-spl; +}; + +&clks { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; }; &gpt1 { @@ -19,6 +55,8 @@ }; &semc { + u-boot,dm-spl; + bank1: bank at 0 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imxrt1050.dtsi b/arch/arm/dts/imxrt1050.dtsi index 5f5a98e19e..e21f92864f 100644 --- a/arch/arm/dts/imxrt1050.dtsi +++ b/arch/arm/dts/imxrt1050.dtsi @@ -27,10 +27,7 @@ }; clocks { - u-boot,dm-spl; - osc: osc { - u-boot,dm-spl; compatible = "fsl,imx-osc", "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; @@ -38,10 +35,7 @@ }; soc { - u-boot,dm-spl; - semc: semc at 402f0000 { - u-boot,dm-spl; compatible = "fsl,imxrt-semc"; reg = <0x402f0000 0x4000>; clocks = <&clks IMXRT1050_CLK_SEMC>; @@ -66,7 +60,6 @@ }; clks: ccm at 400fc000 { - u-boot,dm-spl; compatible = "fsl,imxrt1050-ccm"; reg = <0x400fc000 0x4000>; interrupts = , @@ -75,7 +68,6 @@ }; usdhc1: usdhc at 402c0000 { - u-boot,dm-spl; compatible = "fsl,imxrt-usdhc"; reg = <0x402c0000 0x10000>; interrupts = ; @@ -88,7 +80,6 @@ }; gpio1: gpio at 401b8000 { - u-boot,dm-spl; compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; reg = <0x401b8000 0x4000>; interrupts = , @@ -100,7 +91,6 @@ }; gpio2: gpio at 401bc000 { - u-boot,dm-spl; compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; reg = <0x401bc000 0x4000>; interrupts = , @@ -112,7 +102,6 @@ }; gpio3: gpio at 401c0000 { - u-boot,dm-spl; compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; reg = <0x401c0000 0x4000>; interrupts = , @@ -124,7 +113,6 @@ }; gpio4: gpio at 401c4000 { - u-boot,dm-spl; compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; reg = <0x401c4000 0x4000>; interrupts = , @@ -136,7 +124,6 @@ }; gpio5: gpio at 400c0000 { - u-boot,dm-spl; compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; reg = <0x400c0000 0x4000>; interrupts = , -- 2.25.1