From: Giulio Benetti Date: Thu, 20 May 2021 16:10:12 +0200 Subject: [PATCH 0/6] i.MXRT1050 add Usb Host support Message-ID: <20210520141018.2972320-1-giulio.benetti@benettiengineering.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patchset adds Usb Host support for imxrt1050-evk board adjusting the compatible driver ehci-mx6. This allows to read a FAT usb key connected to usbotg1 port of imxrt1050-evk board. Giulio Benetti (6): ARM: IMXRT: introduce is_imxrt*() macros and get_cpu_rev() clk: imx: clk-imxrt1050: introduce IMXRT1050_CLK_USBOH3 usb: ehci-mx6: add support for i.MXRT ARM: dts: imxrt1050: add usbotg1, usbphy1 and usbmisc nodes ARM: dts: imxrt1050-evk: enable usbotg1 node as host configs: imxrt1050-evk: enable host usb support and its command arch/arm/dts/imxrt1050-evk.dts | 5 ++++ arch/arm/dts/imxrt1050.dtsi | 27 +++++++++++++++++++++ arch/arm/include/asm/arch-imx/cpu.h | 3 +++ arch/arm/include/asm/arch-imxrt/imx-regs.h | 4 +++ arch/arm/include/asm/mach-imx/sys_proto.h | 4 +++ arch/arm/mach-imx/imxrt/soc.c | 12 +++++++++ configs/imxrt1050-evk_defconfig | 7 +++++- drivers/clk/imx/clk-imxrt1050.c | 2 ++ drivers/usb/host/Kconfig | 2 +- drivers/usb/host/ehci-mx6.c | 13 +++++----- include/dt-bindings/clock/imxrt1050-clock.h | 3 ++- 11 files changed, 73 insertions(+), 9 deletions(-) -- 2.25.1