From: Sergey Matyukevich Date: Tue, 1 Jun 2021 00:27:41 +0300 Subject: [Buildroot] [PATCH/RFC 21/28] configs/orangepi_prime_defconfig: bump BSP versions In-Reply-To: <20210531212748.2378872-1-geomatsi@gmail.com> References: <20210531212748.2378872-1-geomatsi@gmail.com> Message-ID: <20210531212748.2378872-22-geomatsi@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Bump U-Boot and Linux kernel versions. Updating U-Boot to 2021.04 requires the following two changes. First, after switching to binman, u-boot.itb is no more generated for 64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should be used instead. This image contains SPL, U-Boot, and FIT image, where FIT image contains other binaries such as BL31 and SCP. Second, new U-Boot enables support for System Control Processor (SCP) firmware. SCP firmware is included by default into FIT image in the combined u-boot-sunxi-with-spl.bin binary. When SCP is not available or not needed, it should be explicitly disabled by pointing to an empty file. Support for Allwinner SCP firmware is not yet available neither in Buildroot nor in mainline kernel. So disable it for now using custom U-Boot build options. Signed-off-by: Sergey Matyukevich --- board/orangepi/orangepi-prime/genimage.cfg | 10 ++-------- configs/orangepi_prime_defconfig | 13 ++++++------- 2 files changed, 8 insertions(+), 15 deletions(-) diff --git a/board/orangepi/orangepi-prime/genimage.cfg b/board/orangepi/orangepi-prime/genimage.cfg index bb01ed9f10..be7e9d7908 100644 --- a/board/orangepi/orangepi-prime/genimage.cfg +++ b/board/orangepi/orangepi-prime/genimage.cfg @@ -15,15 +15,9 @@ image sdcard.img { partition spl { in-partition-table = "no" - image = "sunxi-spl.bin" + image = "u-boot-sunxi-with-spl.bin" offset = 8192 - } - - partition u-boot { - in-partition-table = "no" - image = "u-boot.itb" - offset = 40K - size = 1M # 1MB - 40K + size = 1040384 # 1MB - 8KB } partition boot { diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig index ddee65c185..580a2baf5b 100644 --- a/configs/orangepi_prime_defconfig +++ b/configs/orangepi_prime_defconfig @@ -2,8 +2,7 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 5.0 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y @@ -17,15 +16,15 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_prime" BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -BR2_TARGET_UBOOT_FORMAT_CUSTOM=y -BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin" +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null" BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-prime/boot.cmd" @@ -33,7 +32,7 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-prime/b # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12.2" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-prime" -- 2.31.1