From: Rob Herring Date: Wed, 2 Jun 2021 15:10:21 -0500 Subject: [PATCH v2 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml. In-Reply-To: <20210527005455.25758-2-steven_lee@aspeedtech.com> References: <20210527005455.25758-1-steven_lee@aspeedtech.com> <20210527005455.25758-2-steven_lee@aspeedtech.com> Message-ID: <20210602201021.GA3900491@robh.at.kernel.org> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On Thu, May 27, 2021 at 08:54:50AM +0800, Steven Lee wrote: > SGPIO bindings should be converted as yaml format. > In addition to the file conversion, a new property max-ngpios is > added in the yaml file as well. > The new property is required by the enhanced sgpio driver for > making the configuration of the max number of gpio pins more flexible. The rest of the binding looks fine. Make this property a separate patch if you don't end up dropping it. > > Signed-off-by: Steven Lee > --- > .../bindings/gpio/aspeed,sgpio.yaml | 91 +++++++++++++++++++ > .../devicetree/bindings/gpio/sgpio-aspeed.txt | 46 ---------- > 2 files changed, 91 insertions(+), 46 deletions(-) > create mode 100644 Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml > delete mode 100644 Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt > > diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml > new file mode 100644 > index 000000000000..02eb0c5023e9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml > @@ -0,0 +1,91 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Aspeed SGPIO controller > + > +maintainers: > + - Andrew Jeffery > + > +description: > + This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC, > + AST2600 have two sgpio master one with 128 pins another one with 80 pins, > + AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial > + GPIO pins can be programmed to support the following options > + - Support interrupt option for each input port and various interrupt > + sensitivity option (level-high, level-low, edge-high, edge-low) > + - Support reset tolerance option for each output port > + - Directly connected to APB bus and its shift clock is from APB bus clock > + divided by a programmable value. > + - Co-work with external signal-chained TTL components (74LV165/74LV595) > + > +properties: > + compatible: > + enum: > + - aspeed,ast2400-sgpiom > + - aspeed,ast2500-sgpiom > + - aspeed,ast2600-sgpiom > + > + reg: > + maxItems: 1 > + > + gpio-controller: true > + > + '#gpio-cells': > + const: 2 > + > + interrupts: > + maxItems: 1 > + > + interrupt-controller: true > + > + clocks: > + maxItems: 1 > + > + ngpios: > + minimum: 0 > + maximum: 128 > + > + max-ngpios: > + description: > + represents the number of actual hardware-supported GPIOs (ie, > + slots within the clocked serial GPIO data). Since each HW GPIO is both an > + input and an output, we provide max_ngpios * 2 lines on our gpiochip > + device. We also use it to define the split between the inputs and > + outputs; the inputs start at line 0, the outputs start at max_ngpios. > + minimum: 0 > + maximum: 128 > + > + bus-frequency: true > + > +required: > + - compatible > + - reg > + - gpio-controller > + - '#gpio-cells' > + - interrupts > + - interrupt-controller > + - ngpios > + - max-ngpios > + - clocks > + - bus-frequency > + > +additionalProperties: false > + > +examples: > + - | > + #include > + sgpio: sgpio at 1e780200 { > + #gpio-cells = <2>; > + compatible = "aspeed,ast2500-sgpiom"; > + gpio-controller; > + interrupts = <40>; > + reg = <0x1e780200 0x0100>; > + clocks = <&syscon ASPEED_CLK_APB>; > + interrupt-controller; > + ngpios = <8>; > + max-ngpios = <80>; > + bus-frequency = <12000000>; > + }; > diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt > deleted file mode 100644 > index be329ea4794f..000000000000 > --- a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt > +++ /dev/null > @@ -1,46 +0,0 @@ > -Aspeed SGPIO controller Device Tree Bindings > --------------------------------------------- > - > -This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full > -featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to > -support the following options: > -- Support interrupt option for each input port and various interrupt > - sensitivity option (level-high, level-low, edge-high, edge-low) > -- Support reset tolerance option for each output port > -- Directly connected to APB bus and its shift clock is from APB bus clock > - divided by a programmable value. > -- Co-work with external signal-chained TTL components (74LV165/74LV595) > - > -Required properties: > - > -- compatible : Should be one of > - "aspeed,ast2400-sgpio", "aspeed,ast2500-sgpio" > -- #gpio-cells : Should be 2, see gpio.txt > -- reg : Address and length of the register set for the device > -- gpio-controller : Marks the device node as a GPIO controller > -- interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt > -- interrupt-controller : Mark the GPIO controller as an interrupt-controller > -- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose > - 2 software GPIOs per hardware GPIO: one for hardware input, one for hardware > - output. Up to 80 pins, must be a multiple of 8. > -- clocks : A phandle to the APB clock for SGPM clock division > -- bus-frequency : SGPM CLK frequency > - > -The sgpio and interrupt properties are further described in their respective > -bindings documentation: > - > -- Documentation/devicetree/bindings/gpio/gpio.txt > -- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > - > - Example: > - sgpio: sgpio at 1e780200 { > - #gpio-cells = <2>; > - compatible = "aspeed,ast2500-sgpio"; > - gpio-controller; > - interrupts = <40>; > - reg = <0x1e780200 0x0100>; > - clocks = <&syscon ASPEED_CLK_APB>; > - interrupt-controller; > - ngpios = <8>; > - bus-frequency = <12000000>; > - }; > -- > 2.17.1