From: Steven Lee Date: Tue, 8 Jun 2021 18:25:37 +0800 Subject: [PATCH v5 02/10] dt-bindings: aspeed-sgpio: Add ast2600 sgpio compatibles. In-Reply-To: <20210608102547.4880-1-steven_lee@aspeedtech.com> References: <20210608102547.4880-1-steven_lee@aspeedtech.com> Message-ID: <20210608102547.4880-3-steven_lee@aspeedtech.com> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit AST2600 SoC has 2 SGPIO master interfaces one with 128 pins another one with 80 pins. Add ast2600-sgpiom0-80 and ast2600-sgpiom-128 compatibles and update descriptions to introduce the max number of available gpio pins that AST2600 supported. Signed-off-by: Steven Lee Reviewed-by: Andrew Jeffery --- Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml index b2ae211411ff..0e42eded3c1e 100644 --- a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml +++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml @@ -10,9 +10,10 @@ maintainers: - Andrew Jeffery description: - This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full - featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to - support the following options + This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC, + AST2600 have two sgpio master one with 128 pins another one with 80 pins, + AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial + GPIO pins can be programmed to support the following options - Support interrupt option for each input port and various interrupt sensitivity option (level-high, level-low, edge-high, edge-low) - Support reset tolerance option for each output port @@ -25,6 +26,8 @@ properties: enum: - aspeed,ast2400-sgpio - aspeed,ast2500-sgpio + - aspeed,ast2600-sgpiom-80 + - aspeed,ast2600-sgpiom-128 reg: maxItems: 1 -- 2.17.1