From: Steven Lee Date: Tue, 8 Jun 2021 18:25:38 +0800 Subject: [PATCH v5 03/10] ARM: dts: aspeed-g6: Add SGPIO node. In-Reply-To: <20210608102547.4880-1-steven_lee@aspeedtech.com> References: <20210608102547.4880-1-steven_lee@aspeedtech.com> Message-ID: <20210608102547.4880-4-steven_lee@aspeedtech.com> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit AST2600 supports 2 SGPIO master interfaces one with 128 pins another one with 80 pins. Signed-off-by: Steven Lee --- arch/arm/boot/dts/aspeed-g6.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index f96607b7b4e2..c55baaf94314 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -377,6 +377,34 @@ #interrupt-cells = <2>; }; + sgpiom0: sgpiom at 1e780500 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-sgpiom-128"; + reg = <0x1e780500 0x100>; + interrupts = ; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupt-controller; + bus-frequency = <12000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgpm1_default>; + status = "disabled"; + }; + + sgpiom1: sgpiom at 1e780600 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-sgpiom-80"; + reg = <0x1e780600 0x100>; + interrupts = ; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupt-controller; + bus-frequency = <12000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgpm2_default>; + status = "disabled"; + }; + gpio1: gpio at 1e780800 { #gpio-cells = <2>; gpio-controller; -- 2.17.1