From: Sergey Matyukevich Date: Fri, 25 Jun 2021 22:33:17 +0300 Subject: [Buildroot] [PATCH v3 4/5] configs/orangepi_zero_plus2_defconfig: switch to mainline TF-A In-Reply-To: <20210625193318.635449-1-geomatsi@gmail.com> References: <20210625193318.635449-1-geomatsi@gmail.com> Message-ID: <20210625193318.635449-5-geomatsi@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Switch to mainline TF-A that provides basic support for H5 and A64. Note that Allwinner platform layer in TF-A does not provide support for GCC stack protection, so make sure to disable this TF-A feature. Signed-off-by: Sergey Matyukevich --- configs/orangepi_zero_plus2_defconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig index aa4c5c9413..203d86e7fc 100644 --- a/configs/orangepi_zero_plus2_defconfig +++ b/configs/orangepi_zero_plus2_defconfig @@ -8,10 +8,10 @@ BR2_ROOTFS_OVERLAY="board/orangepi/orangepi-zero-plus2/rootfs_overlay" # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP_NONE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y # Bootloader -- 2.32.0