From: Sergey Matyukevich Date: Sun, 4 Jul 2021 18:45:14 +0300 Subject: [Buildroot] [PATCH v2 1/2] board/stm32mp157c-dk2: fix U-Boot corruption on the first boot In-Reply-To: <20210704154515.431798-1-geomatsi@gmail.com> References: <20210704154515.431798-1-geomatsi@gmail.com> Message-ID: <20210704154515.431798-2-geomatsi@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net The stm32mp157c-dk2 image successfully boots only once. Subsequent boot attempts fail to reach U-Boot. The root cause turns out to be in U-Boot corruption during the first boot. The stm32mp1 U-Boot stores its environment at the end of GPT partition named 'ssbl' since v2020.10-rc2. However Buildroot genimage template for stm32mp157 boards creates 'ssbl' partition w/o extra space for U-Boot primary and redundant environments. This patch explicitly specifies 'ssbl' partition size that should be enough for both u-boot.stm32 image (~1M) and both environments (16K). Signed-off-by: Sergey Matyukevich --- board/stmicroelectronics/common/stm32mp157/genimage.cfg.template | 1 + 1 file changed, 1 insertion(+) diff --git a/board/stmicroelectronics/common/stm32mp157/genimage.cfg.template b/board/stmicroelectronics/common/stm32mp157/genimage.cfg.template index f341c19f2f..03fba8daf0 100644 --- a/board/stmicroelectronics/common/stm32mp157/genimage.cfg.template +++ b/board/stmicroelectronics/common/stm32mp157/genimage.cfg.template @@ -13,6 +13,7 @@ image sdcard.img { partition ssbl { image = "u-boot.stm32" + size = 2M } partition rootfs { -- 2.32.0