From: Randy Dunlap Date: Thu, 22 Jul 2021 20:48:40 -0700 Subject: [PATCH] pinctrl: aspeed: placate kernel-doc warnings Message-ID: <20210723034840.8752-1-rdunlap@infradead.org> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Eliminate kernel-doc warnings in drivers/pinctrl/aspeed by using proper kernel-doc notation. Fixes these kernel-doc warnings: drivers/pinctrl/aspeed/pinmux-aspeed.c:61: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Query the enabled or disabled state for a mux function's signal on a pin drivers/pinctrl/aspeed/pinctrl-aspeed.c:135: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Search for the signal expression needed to enable the pin's signal for the Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Aditya Srivastava Cc: Andrew Jeffery Cc: linux-aspeed at lists.ozlabs.org Cc: openbmc at lists.ozlabs.org Cc: Linus Walleij Cc: linux-gpio at vger.kernel.org --- drivers/pinctrl/aspeed/pinctrl-aspeed.c | 4 ++-- drivers/pinctrl/aspeed/pinmux-aspeed.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) --- linux-next-20210722.orig/drivers/pinctrl/aspeed/pinmux-aspeed.c +++ linux-next-20210722/drivers/pinctrl/aspeed/pinmux-aspeed.c @@ -59,7 +59,8 @@ int aspeed_sig_desc_eval(const struct as } /** - * Query the enabled or disabled state for a mux function's signal on a pin + * aspeed_sig_expr_eval - Query the enabled or disabled state for a + * mux function's signal on a pin * * @ctx: The driver context for the pinctrl IP * @expr: An expression controlling the signal for a mux function on a pin --- linux-next-20210722.orig/drivers/pinctrl/aspeed/pinctrl-aspeed.c +++ linux-next-20210722/drivers/pinctrl/aspeed/pinctrl-aspeed.c @@ -133,8 +133,8 @@ static int aspeed_disable_sig(struct asp } /** - * Search for the signal expression needed to enable the pin's signal for the - * requested function. + * aspeed_find_expr_by_name - Search for the signal expression needed to + * enable the pin's signal for the requested function. * * @exprs: List of signal expressions (haystack) * @name: The name of the requested function (needle)