Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0A839C433FE for ; Fri, 19 Nov 2021 15:53:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id DC23961B1E for ; Fri, 19 Nov 2021 15:53:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236054AbhKSP4n (ORCPT ); Fri, 19 Nov 2021 10:56:43 -0500 Received: from smtp1.axis.com ([195.60.68.17]:29641 "EHLO smtp1.axis.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229936AbhKSP4n (ORCPT ); Fri, 19 Nov 2021 10:56:43 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=axis.com; q=dns/txt; s=axis-central1; t=1637337221; x=1668873221; h=from:to:cc:subject:date:message-id:mime-version: content-transfer-encoding; bh=zfBIZeQRcFCYxJccOygiK3a95OHeEquBUFUA5cMxr94=; b=pTjIlz03f2ijqmkUOJdL6WxkCeXTY08zgMWAIXnkgYoaGHORu6k59bu8 ls9XAcoQInyKeiAT3aIEBxYgx43kT38rdziaYYsfVSh/dMKxHa+rXfoPV QXnombJzSzoUpT3PWtRvkblUBSqkjYpSMguZA2lPYiHPO+NoT3Y8k5r1a NR9PSBoPSuJLdiNFeC9gR5y/d1p2HyICW2M+D+4RqLDDSbjNOEbQ9CFZb Tnng/JUoGLdfeynVzoq6PG2kFD9ZRHBO4jN1yeutOUN4XJYjyLU+7pDO5 mYIpkDaHomyMyVxQ8uTJk/DYOFpiGvZhCUH0W8fodXIt7z+EUc98HWR3K g==; From: =?UTF-8?q?M=C3=A5rten=20Lindahl?= To: Jaehoon Chung , Ulf Hansson CC: Doug Anderson , , , =?UTF-8?q?M=C3=A5rten=20Lindahl?= Subject: [PATCH v6] mmc: dw_mmc: Allow lower TMOUT value than maximum Date: Fri, 19 Nov 2021 16:53:37 +0100 Message-ID: <20211119155337.14341-1-marten.lindahl@axis.com> X-Mailer: git-send-email 2.20.1 MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org The TMOUT register is always set with a full value for every transfer, which (with a 200MHz clock) will give a full DRTO of ~84 milliseconds. This is normally good enough to complete the request, but setting a full value makes it impossible to test shorter timeouts, when for example testing data read times on different SD cards. Add a function to set any value smaller than the maximum of 0xFFFFFF. Signed-off-by: MÃ¥rten Lindahl --- v2: - Calculate new value before checking boundaries - Include CLKDIV register to get proper value v3: - Use 'if-else' instead of 'goto' - Don't touch response field when maximize data field v4: - Prevent 32bit divider overflow by splitting the operation - Changed %06x to %#08x as suggested by Doug - Rephrased commit msg as suggested by Doug v5: - Use u32 type for CPU reg access - Make tmp 64bit to handle INT_MAX parameters v6: - Use u64 type for tmp drivers/mmc/host/dw_mmc.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index d977f34f6b55..f310d9438dff 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1283,6 +1283,33 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) mci_writel(host, CTYPE, (slot->ctype << slot->id)); } +static void dw_mci_set_data_timeout(struct dw_mci *host, + unsigned int timeout_ns) +{ + u32 clk_div, tmout; + u64 tmp; + + clk_div = (mci_readl(host, CLKDIV) & 0xFF) * 2; + if (clk_div == 0) + clk_div = 1; + + tmp = DIV_ROUND_UP_ULL((u64)timeout_ns * host->bus_hz, NSEC_PER_SEC); + tmp = DIV_ROUND_UP_ULL(tmp, clk_div); + + /* TMOUT[7:0] (RESPONSE_TIMEOUT) */ + tmout = 0xFF; /* Set maximum */ + + /* TMOUT[31:8] (DATA_TIMEOUT) */ + if (!tmp || tmp > 0xFFFFFF) + tmout |= (0xFFFFFF << 8); + else + tmout |= (tmp & 0xFFFFFF) << 8; + + mci_writel(host, TMOUT, tmout); + dev_dbg(host->dev, "timeout_ns: %u => TMOUT[31:8]: 0x%#08x", + timeout_ns, tmout >> 8); +} + static void __dw_mci_start_request(struct dw_mci *host, struct dw_mci_slot *slot, struct mmc_command *cmd) @@ -1303,7 +1330,7 @@ static void __dw_mci_start_request(struct dw_mci *host, data = cmd->data; if (data) { - mci_writel(host, TMOUT, 0xFFFFFFFF); + dw_mci_set_data_timeout(host, data->timeout_ns); mci_writel(host, BYTCNT, data->blksz*data->blocks); mci_writel(host, BLKSIZ, data->blksz); } -- 2.20.1