Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id C76A0C433F5 for ; Wed, 23 Mar 2022 21:22:31 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id C1CF084002; Wed, 23 Mar 2022 22:21:23 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=fail (p=none dis=none) header.from=konsulko.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 6EE8983FC2; Wed, 23 Mar 2022 22:20:36 +0100 (CET) Received: from mail-qt1-f172.google.com (mail-qt1-f172.google.com [209.85.160.172]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 0C37883FC9 for ; Wed, 23 Mar 2022 22:20:27 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=fail (p=none dis=none) header.from=konsulko.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tom.rini@gmail.com Received: by mail-qt1-f172.google.com with SMTP id a11so2323157qtb.12 for ; Wed, 23 Mar 2022 14:20:26 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=YkN4nrcBh0FoK6az07ZLR2mlh8nlUg5iCP20M8oefJ4=; b=uOMU7vuRFmqu/MFqpZo0daDQtLdgs9igN5A0gPt1e3BRihGHbHXjkwKITkgatzwSI4 AkLsL5MQodmjZrTcx69sr7rs/IbyaXutCrr7gbDpQjUYKxr+GnsRZM9vDj4ge4VGGEsy XOjqZYqyh3kc0UF3qR5nDYrCZi05I7q87tASPa6X//qeZteGj0mj2cHnZdjz+aIbgkCq b/e0TBEddgPoyOuCuBLA2HXiF1Tut5a1S4aRYpRXA0oYNaMldpTTDnt2R8v8piBR2CLb rL01sLpxu/3SPu+JVXxmQ8w8/GeC1DZDt+4NbgmhIZtTAf6CU/5AsSWi9nSfM5UYK6Nl 0MvQ== X-Gm-Message-State: AOAM530ZZfFZWepWFalaYRRKu1LZ6SZ/ewoHC0DlJBf3ZM/+HTTlBUGL OYyac8WyisdL4jnrPfe9QGG+p7m5Ag== X-Google-Smtp-Source: ABdhPJzKmfnYJ0b2z8qPDiKILdX2tIBE4b+57xj8ajvIgo+WM18KjI8UamBa+qf13F6xLsLhQfdTaA== X-Received: by 2002:ac8:7dcd:0:b0:2e1:deb2:4da7 with SMTP id c13-20020ac87dcd000000b002e1deb24da7mr1664615qte.606.1648070425499; Wed, 23 Mar 2022 14:20:25 -0700 (PDT) Received: from bill-the-cat.lan (2603-6081-7b01-cbda-2ef0-5dff-fedb-a8ba.res6.spectrum.com. [2603:6081:7b01:cbda:2ef0:5dff:fedb:a8ba]) by smtp.gmail.com with ESMTPSA id w8-20020ac87e88000000b002e1cdc11203sm868269qtj.18.2022.03.23.14.20.24 for (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 23 Mar 2022 14:20:25 -0700 (PDT) From: Tom Rini To: u-boot@lists.denx.de Subject: [PATCH 13/22] Convert CONFIG_LPUART et al to Kconfig Date: Wed, 23 Mar 2022 17:20:00 -0400 Message-Id: <20220323212009.1066483-13-trini@konsulko.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220323212009.1066483-1-trini@konsulko.com> References: <20220323212009.1066483-1-trini@konsulko.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean This converts the following to Kconfig: CONFIG_LPUART CONFIG_LPUART_32B_REG And note that CONFIG_LPUART_32B_REG is unused in code. Signed-off-by: Tom Rini --- configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 2 +- configs/ls1021aqds_nor_lpuart_defconfig | 2 +- configs/ls1021atwr_nor_lpuart_defconfig | 2 +- configs/ls1028aqds_tfa_lpuart_defconfig | 2 +- configs/ls1043aqds_lpuart_defconfig | 2 +- configs/ls1046aqds_lpuart_defconfig | 2 +- drivers/serial/Kconfig | 4 ++++ include/configs/ls1021aqds.h | 4 +--- include/configs/ls1021atwr.h | 4 +--- include/configs/ls1028aqds.h | 1 - include/configs/ls1043aqds.h | 5 ----- include/configs/ls1046aqds.h | 1 - 12 files changed, 12 insertions(+), 19 deletions(-) diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index aedc12a46939..7766f1244c66 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -20,7 +20,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y @@ -88,6 +87,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000 CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index 56e00a70b116..43f93f4324dc 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -20,7 +20,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y @@ -89,6 +88,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000 CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index 5bb3175df41a..973b499fc920 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -20,7 +20,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" @@ -76,6 +75,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000 CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig index 1d0e303da2e1..0f4a33c66d1e 100644 --- a/configs/ls1028aqds_tfa_lpuart_defconfig +++ b/configs/ls1028aqds_tfa_lpuart_defconfig @@ -22,7 +22,6 @@ CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" @@ -90,6 +89,7 @@ CONFIG_DM_SCSI=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig index d583573f1794..105fc5a0d891 100644 --- a/configs/ls1043aqds_lpuart_defconfig +++ b/configs/ls1043aqds_lpuart_defconfig @@ -25,7 +25,6 @@ CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y @@ -92,6 +91,7 @@ CONFIG_SYS_QE_FMAN_FW_IN_NOR=y CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_USB=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index 282cb435007d..47636f10e214 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -25,7 +25,6 @@ CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y @@ -93,6 +92,7 @@ CONFIG_SYS_QE_FMAN_FW_IN_NOR=y CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 345d1881f552..610f8062c76b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -647,6 +647,10 @@ config FSL_LPUART Select this to enable a Low Power UART for Freescale VF610 and QorIQ Layerscape devices. +config LPUART + bool "Use the LPUART as console" + depends on FSL_LPUART + config MVEBU_A3700_UART bool "UART support for Armada 3700" help diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 91e73c7d4569..b97d2ea05f84 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -268,9 +268,7 @@ /* * Serial Port */ -#ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG -#else +#ifndef CONFIG_LPUART #define CONFIG_SYS_NS16550_SERIAL #ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index f5d40aa3023b..8e5f6a560cf2 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -165,9 +165,7 @@ /* * Serial Port */ -#ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG -#else +#ifndef CONFIG_LPUART #define CONFIG_SYS_NS16550_SERIAL #ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index 1b4d181310fa..843cd5991500 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -66,7 +66,6 @@ /* LPUART */ #ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG #define CFG_LPUART_MUX_MASK 0xf0 #define CFG_LPUART_EN 0xf0 #endif diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index e9919cd05f7a..bc02ac5ccb69 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -39,11 +39,6 @@ #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB #endif -/* LPUART */ -#ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG -#endif - /* SATA */ /* EEPROM */ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 2972e3beac22..ce68d3f929fc 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -54,7 +54,6 @@ /* LPUART */ #ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG #define CFG_UART_MUX_MASK 0x6 #define CFG_UART_MUX_SHIFT 1 #define CFG_LPUART_EN 0x2 -- 2.25.1