From: Hans de Goede Date: Thu, 24 Mar 2022 17:59:16 +0100 Subject: [PATCH 1/3] Documentation/ABI: sysfs-driver-aspeed-uart-routing: Fix sphinx warning In-Reply-To: <20220324165918.22005-1-hdegoede@redhat.com> References: <20220324165918.22005-1-hdegoede@redhat.com> Message-ID: <20220324165918.22005-2-hdegoede@redhat.com> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Fix the following warning from "make htmldocs": Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing:2: WARNING: Inline emphasis start-string without end-string. This is caused by the used of '*' in the example cat command, mark the command as code to fix this. Signed-off-by: Hans de Goede --- Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing index b363827da437..1e25cd2cacc1 100644 --- a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing +++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing @@ -8,9 +8,10 @@ Description: Selects the RX source of the UARTx device. selected option marked by brackets "[]". The list of available options depends on the selected file. - e.g. - cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1 - [io1] io2 io3 io4 uart2 uart3 uart4 io6 + e.g.:: + + # cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1 + [io1] io2 io3 io4 uart2 uart3 uart4 io6 In this case, UART1 gets its input from IO1 (physical serial port 1). -- 2.35.1