Return-Path: Received: from mga06.intel.com (mga06b.intel.com [134.134.136.31]) by gabe.freedesktop.org (Postfix) with ESMTPS id A0ABB10F674 for ; Fri, 13 May 2022 11:07:45 +0000 (UTC) From: Swati Sharma To: igt-dev@lists.freedesktop.org Date: Fri, 13 May 2022 16:37:47 +0530 Message-Id: <20220513110747.24831-1-swati2.sharma@intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Subject: [igt-dev] [v2] tests/i915/kms_dsc: IGT cleanup List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: igt-dev-bounces@lists.freedesktop.org Sender: "igt-dev" List-ID: Remove redundant code and before starting the subtest, clean up the states to default by igt_display_reset(). Few minor fixes in indentation. Added subtests description. v2: -minor mistake in subtest name -commit was missing after reset, added Signed-off-by: Patnana Venkata Sai Signed-off-by: Swati Sharma --- tests/i915/kms_dsc.c | 93 ++++++++++++++++++++------------------------ 1 file changed, 43 insertions(+), 50 deletions(-) diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c index 22d2216e..d0c7c0c7 100644 --- a/tests/i915/kms_dsc.c +++ b/tests/i915/kms_dsc.c @@ -44,13 +44,14 @@ #include #include -/* currently dsc compression is verifying on 8bpc frame only */ +IGT_TEST_DESCRIPTION("Test to validate display stream compression"); + +/* currently dsc is verifed on 8bpc frame only */ #define XRGB8888_DRM_FORMAT_MIN_BPP 8 -enum dsc_test_type -{ - test_basic_dsc_enable, - test_dsc_compression_bpp +enum dsc_test_type { + TEST_BASIC_DSC_ENABLE, + TEST_DSC_COMPRESSION_BPP }; typedef struct { @@ -82,7 +83,7 @@ static void force_dsc_enable(data_t *data) igt_debug ("Forcing DSC enable on %s\n", data->conn_name); ret = igt_force_dsc_enable(data->drm_fd, - data->output->config.connector); + data->output->config.connector); igt_assert_f(ret > 0, "debugfs_write failed"); } @@ -93,8 +94,8 @@ static void force_dsc_enable_bpp(data_t *data) igt_debug("Forcing DSC BPP to %d on %s\n", data->compression_bpp, data->conn_name); ret = igt_force_dsc_enable_bpp(data->drm_fd, - data->output->config.connector, - data->compression_bpp); + data->output->config.connector, + data->compression_bpp); igt_assert_f(ret > 0, "debugfs_write failed"); } @@ -121,19 +122,6 @@ static void restore_force_dsc_en(void) force_dsc_restore_fd = -1; } -static void test_cleanup(data_t *data) -{ - igt_plane_t *primary; - - if (data->output) { - primary = igt_output_get_plane_type(data->output, - DRM_PLANE_TYPE_PRIMARY); - igt_plane_set_fb(primary, NULL); - igt_output_set_pipe(data->output, PIPE_NONE); - igt_display_commit(&data->display); - } -} - static void kms_dsc_exit_handler(int sig) { restore_force_dsc_en(); @@ -172,7 +160,7 @@ static bool check_dsc_on_connector(data_t *data, uint32_t drmConnector) output = igt_output_from_connector(&data->display, connector); /* - * As dsc supports >= 5k modes, we need to suppress lower + * dsc supports >= 5k modes, we need to suppress lower * resolutions. */ qsort(output->config.connector->modes, @@ -202,57 +190,58 @@ static bool check_dsc_on_connector(data_t *data, uint32_t drmConnector) return true; } -/* - * Re-probe connectors and do a modeset with DSC - * - */ +/* re-probe connectors and do a modeset with DSC */ static void update_display(data_t *data, enum dsc_test_type test_type) { bool enabled; igt_plane_t *primary; - /* Disable the output first */ - igt_output_set_pipe(data->output, PIPE_NONE); + /* sanitize the state before starting the subtest. */ + igt_display_reset(&data->display); igt_display_commit(&data->display); igt_debug("DSC is supported on %s\n", data->conn_name); save_force_dsc_en(data); force_dsc_enable(data); - if (test_type == test_dsc_compression_bpp) { + if (test_type == TEST_DSC_COMPRESSION_BPP) { igt_debug("Trying to set BPP to %d\n", data->compression_bpp); force_dsc_enable_bpp(data); } igt_output_set_pipe(data->output, data->pipe); qsort(data->output->config.connector->modes, - data->output->config.connector->count_modes, - sizeof(drmModeModeInfo), - sort_drm_modes); + data->output->config.connector->count_modes, + sizeof(drmModeModeInfo), + sort_drm_modes); igt_output_override_mode(data->output, &data->output->config.connector->modes[0]); primary = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY); - /* Now set the output to the desired mode */ + /* now set the output to the desired mode */ igt_plane_set_fb(primary, &data->fb_test_pattern); igt_display_commit(&data->display); /* - * Until we have CRC check support, manually check if RGB test + * until we have CRC check support, manually check if RGB test * pattern has no corruption. */ manual("RGB test pattern without corruption"); enabled = igt_is_dsc_enabled(data->drm_fd, - data->output->config.connector); + data->output->config.connector); restore_force_dsc_en(); igt_debug("Reset compression BPP\n"); data->compression_bpp = 0; force_dsc_enable_bpp(data); igt_assert_f(enabled, - "Default DSC enable failed on Connector: %s Pipe: %s\n", + "Default DSC enable failed on connector: %s pipe: %s\n", data->conn_name, kmstest_pipe_name(data->pipe)); + + igt_plane_set_fb(primary, NULL); + igt_output_set_pipe(data->output, PIPE_NONE); + igt_display_commit(&data->display); } static void run_test(data_t *data, enum dsc_test_type test_type) @@ -260,7 +249,7 @@ static void run_test(data_t *data, enum dsc_test_type test_type) enum pipe pipe; char test_name[10]; - igt_skip_on_f(test_type == test_dsc_compression_bpp && + igt_skip_on_f(test_type == TEST_DSC_COMPRESSION_BPP && data->output->config.connector->modes[0].hdisplay >= 5120, "bigjoiner does not support force bpp\n"); @@ -276,7 +265,7 @@ static void run_test(data_t *data, enum dsc_test_type test_type) if (data->output->config.connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort && pipe == PIPE_A && IS_GEN11(devid)) { - igt_debug("DSC not supported on Pipe A on external DP in Gen11 platforms\n"); + igt_debug("DSC not supported on pipe A on external DP in gen11 platforms\n"); continue; } @@ -284,9 +273,8 @@ static void run_test(data_t *data, enum dsc_test_type test_type) if (!igt_pipe_connector_valid(pipe, data->output)) continue; - igt_dynamic_f("%s-pipe-%s%s", data->output->name, - kmstest_pipe_name(pipe), - (test_type == test_dsc_compression_bpp) ? + igt_dynamic_f("pipe-%s-%s-%s", kmstest_pipe_name(pipe), data->output->name, + (test_type == TEST_DSC_COMPRESSION_BPP) ? test_name : "") { data->pipe = pipe; igt_skip_on_f((data->output->config.connector->modes[0].hdisplay >= 5120) && @@ -294,9 +282,9 @@ static void run_test(data_t *data, enum dsc_test_type test_type) "pipe-%s not supported due to bigjoiner limitation\n", kmstest_pipe_name(pipe)); update_display(data, test_type); - } - if (test_type == test_dsc_compression_bpp) + + if (test_type == TEST_DSC_COMPRESSION_BPP) break; } @@ -307,8 +295,8 @@ igt_main { data_t data = {}; drmModeRes *res; - drmModeConnector *connector = NULL; int i, j; + igt_fixture { data.drm_fd = drm_open_driver_master(DRIVER_INTEL); data.devid = intel_get_drm_devid(data.drm_fd); @@ -320,19 +308,27 @@ igt_main for_each_pipe(&data.display, i) data.n_pipes++; } + + igt_describe("Tests basic display stream compression functionality if supported " + "by a connector by forcing DSC on all connectors that support it " + "with default parameters"); igt_subtest_with_dynamic("basic-dsc-enable") { for (j = 0; j < res->count_connectors; j++) { if (!check_dsc_on_connector(&data, res->connectors[j])) continue; - run_test(&data, test_basic_dsc_enable); + run_test(&data, TEST_BASIC_DSC_ENABLE); } } + /* currently we are validating compression bpp on XRGB8888 format only */ + igt_describe("Tests basic display stream compression functionality if supported " + "by a connector by forcing DSC on all connectors that support it " + "with certain BPP as the output BPP for the connector"); igt_subtest_with_dynamic("XRGB8888-dsc-compression") { uint32_t bpp_list[] = { XRGB8888_DRM_FORMAT_MIN_BPP, (XRGB8888_DRM_FORMAT_MIN_BPP + - (XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1) / 2, + (XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1) / 2, (XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1 }; @@ -344,15 +340,12 @@ igt_main for (i = 0; i < ARRAY_SIZE(bpp_list); i++) { data.compression_bpp = bpp_list[i]; - run_test(&data, test_dsc_compression_bpp); + run_test(&data, TEST_DSC_COMPRESSION_BPP); } } } igt_fixture { - if (connector) - drmModeFreeConnector(connector); - test_cleanup(&data); drmModeFreeResources(res); igt_display_fini(&data.display); close(data.drm_fd); -- 2.25.1