Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id C6A0BC6FD1D for ; Tue, 21 Mar 2023 08:08:13 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id E573485C4C; Tue, 21 Mar 2023 09:08:10 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=kernel.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=kernel.org header.i=@kernel.org header.b="hRD7fWkL"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id D158E85C4C; Tue, 21 Mar 2023 09:08:08 +0100 (CET) Received: from ams.source.kernel.org (ams.source.kernel.org [145.40.68.75]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id BB1E785BC7 for ; Tue, 21 Mar 2023 09:08:03 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=kernel.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=pali@kernel.org Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 5A214B811C7; Tue, 21 Mar 2023 08:08:03 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id A9D63C433EF; Tue, 21 Mar 2023 08:08:01 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1679386082; bh=Ac8b9UUQ0+ql6B+SCvsm9xfPF6DIuQZQDWnv+Dexpus=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=hRD7fWkL47TbsH8tN15+xodJwTN79e78gGc3rgwh3waH+N5AE13rX+Ma+zYBxSVJB LTkUURVwGtPr/ixWkY0R056CKKdveG9u4PXaCeymrLSeI0xiYsTuGlTj90fyduSN01 pJk/3s1uuEyI41PYSIisHUO0Ca+yXCdxR7k4A4oBM5iSHKaYc1RiJNEkko02N/BLtV AGzxQ+TJkk+n1sihqgDwabQe1SgiHvDS+eZDhjbm0+1G/GJRlHrFsmBiBwBhUJnFHa 9Hdu9SNEjRlrtBDUbg0gGmRxPiyNQSDiWs1s6US2jK0JDZpX1TuwU1Ay1vSwrG8xN7 BEVIKF/dm+EYA== Received: by pali.im (Postfix) id AF63A29B; Tue, 21 Mar 2023 09:07:58 +0100 (CET) Date: Tue, 21 Mar 2023 09:07:58 +0100 From: Pali =?utf-8?B?Um9ow6Fy?= To: Martin Rowe Cc: u-boot@lists.denx.de Subject: Re: [PATCH RFC u-boot-mvebu 0/2] arm: mvebu: Fix eMMC boot Message-ID: <20230321080758.5cmlygv63idaecth@pali> References: <20230305114634.h6wyi26ohuzuamfg@pali> <20230305160416.xc7wlzmkaociwcf7@pali> <20230306115325.5pfb4lheobjg2tsi@pali> <20230319162242.eq5rsxofrrq2ukdg@pali> <20230320173350.j4o7tunn7ijpbhyr@pali> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: User-Agent: NeoMutt/20180716 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean On Tuesday 21 March 2023 08:01:16 Martin Rowe wrote: > On Mon, 20 Mar 2023 at 17:33, Pali Rohár wrote: > > > On Monday 20 March 2023 11:48:59 Martin Rowe wrote: > > > On Sun, 19 Mar 2023 at 16:22, Pali Rohár wrote: > > > > > > > On Sunday 19 March 2023 00:32:01 Martin Rowe wrote: > > > > > On Mon, 6 Mar 2023 at 11:53, Pali Rohár wrote: > > > > > > > > > > > Could you try to print mmc->part_config (ideally as early as > > possible)? > > > > > > > > > > > > > > > > In SPL mmc->part_config is 255 > > > > > In main u-boot at the start of clearfog.c board_init() > > mmc->part_config > > > > is > > > > > 255 > > > > > In main u-boot at the start of clearfog.c checkboard() > > mmc->part_config > > > > is > > > > > 8 (ack: 0, partition_enable: 1, access: 0) > > > > > > > > 255 is uninitialized value. > > > > > > > > > If I set partition_enable to 2, I get the same result except the > > value is > > > > > 16 (ack: 0, partition_enable: 2, access: 0) instead of 8 for the > > last > > > > value > > > > > > > > Try to change "access" bits. > > > > > > > > > > > > > > BootROM - 1.73 > > > > > > > > > > Booting from MMC > > > > > > > > > > U-Boot SPL 2023.04-rc3-00159-gd1653548d2-dirty (Mar 19 2023 - > > 10:05:32 > > > > > +1000) > > > > > High speed PHY - Version: 2.0 > > > > > EEPROM TLV detection failed: Using static config for Clearfog Pro. > > > > > Detected Device ID 6828 > > > > > board SerDes lanes topology details: > > > > > | Lane # | Speed | Type | > > > > > -------------------------------- > > > > > | 0 | 3 | SATA0 | > > > > > | 1 | 0 | SGMII1 | > > > > > | 2 | 5 | PCIe1 | > > > > > | 3 | 5 | USB3 HOST1 | > > > > > | 4 | 5 | PCIe2 | > > > > > | 5 | 0 | SGMII2 | > > > > > -------------------------------- > > > > > High speed PHY - Ended Successfully > > > > > mv_ddr: 14.0.0 > > > > > DDR3 Training Sequence - Switching XBAR Window to FastPath Window > > > > > mv_ddr: completed successfully > > > > > spl.c spl_boot_device part_config = 255 > > > > > Trying to boot from MMC1 > > > > > > > > > > > > > > > U-Boot 2023.04-rc3-00159-gd1653548d2-dirty (Mar 19 2023 - 10:05:32 > > +1000) > > > > > > > > > > SoC: MV88F6828-A0 at 1600 MHz > > > > > DRAM: 1 GiB (800 MHz, 32-bit, ECC not enabled) > > > > > clearfog.c board_init part_config = 255 > > > > > Core: 38 devices, 22 uclasses, devicetree: separate > > > > > MMC: mv_sdh: 0 > > > > > Loading Environment from MMC... *** Warning - bad CRC, using default > > > > > environment > > > > > > > > > > Model: SolidRun Clearfog A1 > > > > > clearfog.c checkboard part_config = 8 > > > > > Board: SolidRun Clearfog Pro > > > > > Net: > > > > > Warning: ethernet@70000 (eth1) using random MAC address - > > > > 32:16:0e:b4:d1:d8 > > > > > eth1: ethernet@70000 > > > > > Warning: ethernet@30000 (eth2) using random MAC address - > > > > 72:30:3f:79:07:12 > > > > > , eth2: ethernet@30000 > > > > > Warning: ethernet@34000 (eth3) using random MAC address - > > > > 82:fb:71:23:46:4f > > > > > , eth3: ethernet@34000 > > > > > Hit any key to stop autoboot: 0 > > > > > => mmc partconf 0 > > > > > EXT_CSD[179], PARTITION_CONFIG: > > > > > BOOT_ACK: 0x0 > > > > > BOOT_PARTITION_ENABLE: 0x1 > > > > > PARTITION_ACCESS: 0x0 > > > > > > > > > > > > > > > > > > > > BootROM - 1.73 > > > > > > > > > > Booting from MMC > > > > > > > > > > U-Boot SPL 2023.04-rc3-00159-gd1653548d2-dirty (Mar 19 2023 - > > 10:05:32 > > > > > +1000) > > > > > High speed PHY - Version: 2.0 > > > > > EEPROM TLV detection failed: Using static config for Clearfog Pro. > > > > > Detected Device ID 6828 > > > > > board SerDes lanes topology details: > > > > > | Lane # | Speed | Type | > > > > > -------------------------------- > > > > > | 0 | 3 | SATA0 | > > > > > | 1 | 0 | SGMII1 | > > > > > | 2 | 5 | PCIe1 | > > > > > | 3 | 5 | USB3 HOST1 | > > > > > | 4 | 5 | PCIe2 | > > > > > | 5 | 0 | SGMII2 | > > > > > -------------------------------- > > > > > High speed PHY - Ended Successfully > > > > > mv_ddr: 14.0.0 > > > > > DDR3 Training Sequence - Switching XBAR Window to FastPath Window > > > > > mv_ddr: completed successfully > > > > > spl.c spl_boot_device part_config = 255 > > > > > Trying to boot from MMC1 > > > > > > > > > > > > > > > U-Boot 2023.04-rc3-00159-gd1653548d2-dirty (Mar 19 2023 - 10:05:32 > > +1000) > > > > > > > > > > SoC: MV88F6828-A0 at 1600 MHz > > > > > DRAM: 1 GiB (800 MHz, 32-bit, ECC not enabled) > > > > > clearfog.c board_init part_config = 255 > > > > > Core: 38 devices, 22 uclasses, devicetree: separate > > > > > MMC: mv_sdh: 0 > > > > > Loading Environment from MMC... *** Warning - bad CRC, using default > > > > > environment > > > > > > > > > > Model: SolidRun Clearfog A1 > > > > > clearfog.c checkboard part_config = 16 > > > > > Board: SolidRun Clearfog Pro > > > > > Net: > > > > > Warning: ethernet@70000 (eth1) using random MAC address - > > > > 92:5a:fc:14:e8:f6 > > > > > eth1: ethernet@70000 > > > > > Warning: ethernet@30000 (eth2) using random MAC address - > > > > 42:9c:d8:3a:cb:b2 > > > > > , eth2: ethernet@30000 > > > > > Warning: ethernet@34000 (eth3) using random MAC address - > > > > c6:99:20:f4:02:a0 > > > > > , eth3: ethernet@34000 > > > > > Hit any key to stop autoboot: 0 > > > > > => mmc partconf 0 > > > > > EXT_CSD[179], PARTITION_CONFIG: > > > > > BOOT_ACK: 0x0 > > > > > BOOT_PARTITION_ENABLE: 0x2 > > > > > PARTITION_ACCESS: 0x0 > > > > > > > > > > > > > Are both logs from the configuration when SPL+u-boot is stored on > > Boot0? > > > > Could you try to erase Boot0 and store SPL+u-boot to Boot1? I'm > > > > interested to see if "access" bits are changed in SPL (before loading > > > > main u-boot). > > > > > > > > > I'm having trouble trying to find the hooks which run between > > board_init > > > > > and checkboard. If you can point me in the right direction I'm happy > > to > > > > > re-run and try to narrow down where the valid values are being set > > from. > > > > > > > > Print it directly in drivers/mmc/mmc.c mmc_startup_v4() where > > > > mmc->part_config = is set from ext_csd[EXT_CSD_PART_CONF] register. > > > > I want to see original value from EXT_CSD_PART_CONF. > > > > > > > > I do not know which hook is the best, so printing it from mmc.c driver > > > > should work better. > > > > > > > > > > u-boot in boot0, partconf set to 0x1: > > > mmc->part_config = 8 > > > > > > u-boot in boot0, partconf set to 0x2: > > > mmc->part_config = 16 > > > > > > u-boot in boot1 (boot0 zeroed), partconf set to 0x1: > > > mmc->part_config = 8 > > > > > > u-boot in boot1 (boot0 zeroed), partconf set to 0x2: > > > mmc->part_config = 16 > > > > Ah, that does not look useful :-( > > > > Just to confirm, is this output from SPL or from main U-Boot? > > > > Definitely SPL. I triple checked because I was also disappointed with those > results. With BootROM hardcoded with its boot order it seems like neither > CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION nor relying on > mmc->part_config is going to work well. In emmc spec is written: Each time the host wants to access a partition the following flow shall be executed: 1. Set PARTITION_ACCESS bits in the PARTITION_CONFIG field of the Extended CSD register in order to address one of the partitions 2. Issue commands referred to the selected partition 3. Restore default access to the User Data Area or re-direction the access to another partition All the reset events (CMD0 or hardware reset) will restore the access by default to the User Data Area. I'm feeling that partition_access bits should be preserved between reading data from boot0 and starting SPL. And these bits somehow could be used to determinate from which source bootrom loaded SPL. Maybe the last point ("all the reset events...") applies there and u-boot mmc driver does some reset in its init phase? And need to figure out how to read PARTITION_ACCESS without u-boot's mmc driver?