From: Gabriel Somlo Date: Wed, 22 Mar 2023 13:04:48 -0400 Subject: [PATCH v1] docs: Correct FW_JUMP_FDT_ADDR calculation example Message-ID: <20230322170448.3600124-1-gsomlo@gmail.com> List-Id: To: opensbi@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit When using `PLATFORM=generic` defaults, the kernel is loaded at `FW_JUMP_ADDR = FW_TEXT_START + 0x200000`, and the FDT is loaded at `FW_JUMP_FDT_ADDR = FW_TEXT_START + 0x2200000`. Therefore, the maximum kernel size before `FW_JUMP_FDT_ADDR` must be increased is the difference, or `0x2000000`. Update the example calculation to reflect this, and avoid confusion. Signed-off-by: Gabriel Somlo --- docs/firmware/fw_jump.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/firmware/fw_jump.md b/docs/firmware/fw_jump.md index 956897e..d1b07b9 100644 --- a/docs/firmware/fw_jump.md +++ b/docs/firmware/fw_jump.md @@ -48,12 +48,12 @@ follows: ``` ${CROSS_COMPILE}objdump -h $KERNEL_ELF | sort -k 5,5 | awk -n '/^ +[0-9]+ /\ {addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' \ - | (( `tail -1` > 0x2200000 )) && echo fdt overlaps kernel,\ + | (( `tail -1` > 0x2000000 )) && echo fdt overlaps kernel,\ increase FW_JUMP_FDT_ADDR ${LLVM}objdump -h --show-lma $KERNEL_ELF | sort -k 5,5 | \ awk -n '/^ +[0-9]+ / {addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}'\ - | (( `tail -1` > 0x2200000 )) && echo fdt overlaps kernel,\ + | (( `tail -1` > 0x2000000 )) && echo fdt overlaps kernel,\ increase FW_JUMP_FDT_ADDR ``` -- 2.39.2