Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 0B11DC77B61 for ; Fri, 28 Apr 2023 18:50:44 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id AE81A85EF5; Fri, 28 Apr 2023 20:50:42 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id D27BC85EEB; Fri, 28 Apr 2023 20:50:40 +0200 (CEST) Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 138C085EF5 for ; Fri, 28 Apr 2023 20:50:36 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1psTAw-0050JI-3n; Fri, 28 Apr 2023 18:50:34 +0000 From: Tim Harvey To: Marek Vasut , u-boot@lists.denx.de Cc: Fabio Estevam , Adam Ford , Tim Harvey Subject: [PATCH] usb: ehci-mx6: move phy setup before register access Date: Fri, 28 Apr 2023 11:50:30 -0700 Message-Id: <20230428185030.1345034-1-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean For the CONFIG_PHY case, move the PHY setup before the register access. This avoids a hang when updating the imx8mm.dtsi which moves the USB OTG power-domains to the PHY. Signed-off-by: Tim Harvey Tested-by: Fabio Estevam --- drivers/usb/host/ehci-mx6.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 91633f013a55..fae20838c60a 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -703,6 +703,10 @@ static int ehci_usb_probe(struct udevice *dev) usb_internal_phy_clock_gate(priv->phy_addr, 1); usb_phy_enable(ehci, priv->phy_addr); #endif +#else + ret = generic_setup_phy(dev, &priv->phy, 0); + if (ret) + goto err_regulator; #endif #if CONFIG_IS_ENABLED(DM_REGULATOR) @@ -725,12 +729,6 @@ static int ehci_usb_probe(struct udevice *dev) mdelay(10); -#if defined(CONFIG_PHY) - ret = generic_setup_phy(dev, &priv->phy, 0); - if (ret) - goto err_regulator; -#endif - hccr = (struct ehci_hccr *)((uintptr_t)&ehci->caplength); hcor = (struct ehci_hcor *)((uintptr_t)hccr + HC_LENGTH(ehci_readl(&(hccr)->cr_capbase))); -- 2.25.1