Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 26E8AC7EE29 for ; Fri, 9 Jun 2023 01:30:01 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 0F0138608C; Fri, 9 Jun 2023 03:29:59 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id C9AB4860CF; Fri, 9 Jun 2023 03:29:56 +0200 (CEST) Received: from finn.localdomain (finn.gateworks.com [108.161.129.64]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 0817285813 for ; Fri, 9 Jun 2023 03:29:54 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=gateworks.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=tharvey@gateworks.com Received: from 068-189-091-139.biz.spectrum.com ([68.189.91.139] helo=tharvey.pdc.gateworks.com) by finn.localdomain with esmtp (Exim 4.93) (envelope-from ) id 1q7Qwp-006Bdo-Hi; Fri, 09 Jun 2023 01:29:51 +0000 From: Tim Harvey To: u-boot@lists.denx.de, Fabio Estevam , Marek Vasut , Adam Ford , Martyn Welch , Marcel Ziswiler Cc: "NXP i . MX U-Boot Team" , Stefano Babic , Tim Harvey Subject: [PATCH] phy: phy-imx8mq-usb: add vbus regulator support Date: Thu, 8 Jun 2023 18:29:49 -0700 Message-Id: <20230609012949.3250445-1-tharvey@gateworks.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Add support for enabling and disabling vbus-supply regulator found on several imx8mp boards in the usb3_phy0 and usb3_phy1 nodes. Without this I suspect U-Boot usb does not work on the following: - imx8mp-beacon-kit - imx8mp-msc-sm2s - imx8mp-verdin-wifi-dev Signed-off-by: Tim Harvey --- drivers/phy/phy-imx8mq-usb.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-imx8mq-usb.c b/drivers/phy/phy-imx8mq-usb.c index 69f01de55538..eed9c07848f4 100644 --- a/drivers/phy/phy-imx8mq-usb.c +++ b/drivers/phy/phy-imx8mq-usb.c @@ -14,6 +14,7 @@ #include #include #include +#include #define PHY_CTRL0 0x0 #define PHY_CTRL0_REF_SSP_EN BIT(2) @@ -81,6 +82,7 @@ struct imx8mq_usb_phy { #endif void __iomem *base; enum imx8mpq_phy_type type; + struct udevice *vbus_supply; }; static const struct udevice_id imx8mq_usb_phy_of_match[] = { @@ -173,9 +175,9 @@ static int imx8mq_usb_phy_power_on(struct phy *usb_phy) struct udevice *dev = usb_phy->dev; struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev); u32 value; + int ret; #if CONFIG_IS_ENABLED(CLK) - int ret; ret = clk_enable(&imx_phy->phy_clk); if (ret) { printf("Failed to enable usb phy clock\n"); @@ -183,6 +185,12 @@ static int imx8mq_usb_phy_power_on(struct phy *usb_phy) } #endif + if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) { + ret = regulator_set_enable(imx_phy->vbus_supply, true); + if (ret) + return ret; + } + /* Disable rx term override */ value = readl(imx_phy->base + PHY_CTRL6); value &= ~PHY_CTRL6_RXTERM_OVERRIDE_SEL; @@ -206,6 +214,9 @@ static int imx8mq_usb_phy_power_off(struct phy *usb_phy) clk_disable(&imx_phy->phy_clk); #endif + if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) + return regulator_set_enable(imx_phy->vbus_supply, false); + return 0; } @@ -224,6 +235,7 @@ struct phy_ops imx8mq_usb_phy_ops = { int imx8mq_usb_phy_probe(struct udevice *dev) { struct imx8mq_usb_phy *priv = dev_get_priv(dev); + int ret; priv->type = dev_get_driver_data(dev); priv->base = dev_read_addr_ptr(dev); @@ -232,7 +244,6 @@ int imx8mq_usb_phy_probe(struct udevice *dev) return -EINVAL; #if CONFIG_IS_ENABLED(CLK) - int ret; /* Assigned clock already set clock */ ret = clk_get_by_name(dev, "phy", &priv->phy_clk); @@ -242,6 +253,15 @@ int imx8mq_usb_phy_probe(struct udevice *dev) } #endif + if (CONFIG_IS_ENABLED(DM_REGULATOR)) { + ret = device_get_supply_regulator(dev, "vbus-supply", + &priv->vbus_supply); + if (ret && ret != -ENOENT) { + pr_err("Failed to get PHY regulator\n"); + return ret; + } + } + return 0; } -- 2.25.1