From: Aleksandr Shubin <privatesub2@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Aleksandr Shubin <privatesub2@gmail.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	=?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Cristian Ciocaltea <cristian.ciocaltea@collabora.com>,
	linux-pwm@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev,
	linux-riscv@lists.infradead.org
Subject: [PATCH v5 3/3] riscv: dts: allwinner: d1: Add pwm node
Date: Mon, 14 Aug 2023 16:32:18 +0300
Message-Id: <20230814133238.741950-4-privatesub2@gmail.com>
In-Reply-To: <20230814133238.741950-1-privatesub2@gmail.com>
References: <20230814133238.741950-1-privatesub2@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

D1 and T113s contain a pwm controller with 8 channels.
This controller is supported by the sun20i-pwm driver.

Add a device tree node for it.

Signed-off-by: Aleksandr Shubin <privatesub2@gmail.com>
---
 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 922e8e0e2c09..e24543b6aff7 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -127,6 +127,17 @@ uart3_pb_pins: uart3-pb-pins {
 			};
 		};
 
+		pwm: pwm@2000c00 {
+			compatible = "allwinner,sun20i-d1-pwm";
+			reg = <0x02000c00 0x400>;
+			clocks = <&dcxo>,
+				 <&ccu CLK_BUS_PWM>;
+			clock-names = "hosc", "bus";
+			resets = <&ccu RST_BUS_PWM>;
+			status = "disabled";
+			#pwm-cells = <0x3>;
+		};
+
 		ccu: clock-controller@2001000 {
 			compatible = "allwinner,sun20i-d1-ccu";
 			reg = <0x2001000 0x1000>;
-- 
2.25.1