Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 0AE9BEE49A5 for ; Tue, 22 Aug 2023 21:36:26 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 1CC2C864A1; Tue, 22 Aug 2023 23:36:25 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.b="lq6knLXT"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id DF1DD864A6; Tue, 22 Aug 2023 23:36:23 +0200 (CEST) Received: from lelv0143.ext.ti.com (lelv0143.ext.ti.com [198.47.23.248]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 9926B86410 for ; Tue, 22 Aug 2023 23:36:19 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=nm@ti.com Received: from lelv0265.itg.ti.com ([10.180.67.224]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id 37MLaHSK099887; Tue, 22 Aug 2023 16:36:17 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1692740177; bh=6KvoqqDq07dF2SeVs3UZnGSGt1JzryNX4jcaXkRYZWA=; h=Date:From:To:CC:Subject:References:In-Reply-To; b=lq6knLXTBQBXPApcx/rmiTStC9iTKIFE1kxAvpWtLrtjWYDLLuJaQSL17l9GC5hau ggkacAZZHoxFkvRNQGr9eWVTOmsBRiVpfCiwK8TUw+02i43C9wGVbJOenP0R4MNNJx hnSxhlqOGCfZCILQOQ0F7gEF4Robpn5ZhONazz5k= Received: from DLEE110.ent.ti.com (dlee110.ent.ti.com [157.170.170.21]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 37MLaHvR019403 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 22 Aug 2023 16:36:17 -0500 Received: from DLEE104.ent.ti.com (157.170.170.34) by DLEE110.ent.ti.com (157.170.170.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Tue, 22 Aug 2023 16:36:17 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE104.ent.ti.com (157.170.170.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Tue, 22 Aug 2023 16:36:16 -0500 Received: from localhost (ileaxei01-snat.itg.ti.com [10.180.69.5]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 37MLaGxc028887; Tue, 22 Aug 2023 16:36:16 -0500 Date: Tue, 22 Aug 2023 16:36:16 -0500 From: Nishanth Menon To: Reid Tonking CC: , , , , , , Subject: Re: [PATCH] arm: dts: j7200: dtb sync with Linux 6.5-rc1 Message-ID: <20230822213616.dntb3hcxxfesachm@napped> References: <20230822185725.6718-1-reidt@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <20230822185725.6718-1-reidt@ti.com> X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean On 13:57-20230822, Reid Tonking wrote: > Sync j7200 device tree files with Linux 6.5-rc1 I understand this is a major step forward, but a still: There is more work to do: a) split the dev-data.c fixup as the first patch b) See comments in https://lore.kernel.org/u-boot/20230816114445.c4c7rgdp5arhmiaq@polyester/ [...] > diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi > index f25c7136c9..a00e85e366 100644 > --- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi > +++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi > @@ -1,6 +1,6 @@ > // SPDX-License-Identifier: GPL-2.0 > /* > - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ > + * Copyright (C) 2020-2023 Texas Instruments Incorporated - https://www.ti.com/ > */ > > #include "k3-j7200-binman.dtsi" > @@ -8,7 +8,7 @@ > / { > chosen { > stdout-path = "serial2:115200n8"; Drop this > - tick-timer = &timer1; > + tick-timer = &mcu_timer0; > }; > > aliases { You dont need the aliases - these come in from board.dts > @@ -28,16 +28,12 @@ > bootph-pre-ram; > }; > > -&cbass_mcu_wakeup { > +&main_esm{ space before the { > bootph-pre-ram; > +}; > > - timer1: timer@40400000 { > - compatible = "ti,omap5430-timer"; > - reg = <0x0 0x40400000 0x0 0x80>; > - ti,timer-alwon; > - clock-frequency = <250000000>; > - bootph-pre-ram; > - }; > +&cbass_mcu_wakeup { > + bootph-pre-ram; > > chipid@43000014 { > bootph-pre-ram; }; End it here. > @@ -45,8 +41,6 @@ > > mcu_navss: bus@28380000 { Dont duplicate the entire node. &mcu_navss { bootph-pre-ram; }; &mcu_ringacc { bootph-pre-ram; }; NOTE: you only need to override reg-names and reg in R5.dtsi not u-boot.dtsi. &mcu_udmap { bootph-pre-ram; }; > bootph-pre-ram; > - #address-cells = <2>; > - #size-cells = <2>; > > ringacc@2b800000 { > reg = <0x0 0x2b800000 0x0 0x400000>, And clean this up. > > &wkup_i2c0 { > bootph-pre-ram; > + > + lp876441: lp876441@4c { NAK. Why is this new stuff coming in -> should'nt be here. > + bootph-pre-ram; > + > + regulators: regulators { > + bootph-pre-ram; > + > + buck1_reg: buck1 { > + bootph-pre-ram; > + }; > + }; > + }; > }; > > &main_i2c0 { > bootph-pre-ram; > + > + exp1: gpio@20 { Again - just do it using the reference &exp1 { bootph-pre-ram; }; And this pattern repeats itself.. > + bootph-pre-ram; > + }; > + > + exp2: gpio@22 { This as well. hbmc -> arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi: flash@0,0 weird that does'nt throw a dtbs_check warning WARNING: u-boot,mux-autoprobe -> this is'nt supported. Also &main_r5fss0 -> ti,cluster-mode=<0> -> Drop that. There is a bit debate about dr_mode = "peripheral"; https://lore.kernel.org/u-boot/fc205109-fd3d-ea79-abcc-f1638115d0d3@kernel.org/#r Depending on where it ends up... [...] > diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts > index e62f9218e8..bd4be7215f 100644 > --- a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts > +++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts [...] > +&mcu_timer0 { > + /delete-property/ power-domains; > + ti,timer-alwon; > + clock-frequency = <25000000>; > + bootph-pre-ram; you already caught this - just pre-ram and clock-frequency. > }; > > &cbass_mcu_wakeup { > - mcu_secproxy: secproxy@2a380000 { > + secure_proxy_mcu: mailbox@2a480000 { Move this out. > bootph-pre-ram; > - compatible = "ti,am654-secure-proxy"; > - reg = <0x0 0x2a380000 0x0 0x80000>, > - <0x0 0x2a400000 0x0 0x80000>, > - <0x0 0x2a480000 0x0 0x80000>; > - reg-names = "rt", "scfg", "target_data"; > - #mbox-cells = <1>; > + status = "okay"; > }; > > sysctrler: sysctrler { > - bootph-pre-ram; > compatible = "ti,am654-system-controller"; > - mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>; > + mboxes= <&secure_proxy_mcu 4>, > + <&secure_proxy_mcu 5>; > mbox-names = "tx", "rx"; > + bootph-pre-ram; > }; > > dm_tifs: dm-tifs { Move this to root similar to am625. it is more or less a hanky stuff we do with this. > @@ -86,250 +66,23 @@ > ti,host-id = <3>; > ti,secure-host; > mbox-names = "rx", "tx"; > - mboxes= <&mcu_secproxy 21>, > - <&mcu_secproxy 23>; > + mboxes= <&secure_proxy_mcu 21>, > + <&secure_proxy_mcu 23>; > bootph-pre-ram; > }; > - > - wkup_vtm0: vtm@42040000 { > - compatible = "ti,am654-vtm", "ti,j721e-avs"; > - reg = <0x0 0x42040000 0x0 0x330>; > - power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; > - #thermal-sensor-cells = <1>; > - }; > }; > > &dmsc { > - mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>; > + mboxes= <&secure_proxy_mcu 8>, > + <&secure_proxy_mcu 6>, <&secure_proxy_mcu 5>; > mbox-names = "tx", "rx", "notify"; > ti,host-id = <4>; > ti,secure-host; > -}; > - > -&wkup_pmx0 { > - bootph-pre-ram; > - wkup_uart0_pins_default: wkup_uart0_pins_default { > - bootph-pre-ram; > - pinctrl-single,pins = < > - J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ > - J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ > - >; > - }; > - > - mcu_uart0_pins_default: mcu_uart0_pins_default { > - bootph-pre-ram; > - pinctrl-single,pins = < > - J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) WKUP_GPIO0_13.MCU_UART0_RXD */ > - J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) WKUP_GPIO0_12.MCU_UART0_TXD */ > - J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) WKUP_GPIO0_14.MCU_UART0_CTSn */ > - J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) WKUP_GPIO0_15.MCU_UART0_RTSn */ > - >; > - }; > - > - wkup_i2c0_pins_default: wkup-i2c0-pins-default { > - pinctrl-single,pins = < > - J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */ > - J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */ > - >; > - }; > - > - mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default { > - pinctrl-single,pins = < > - J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (E20) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */ > - J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C21) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */ > - J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (F19) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */ > - J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* (E22) MCU_OSPI1_CSn1.MCU_HYPERBUS0_CSn1 */ > - J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (E19) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */ > - J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (D21) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */ > - J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D20) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */ > - J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (G19) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */ > - J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (G20) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */ > - J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (F20) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */ > - J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (F21) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */ > - J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (E21) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */ > - J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (B22) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */ > - J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (G21) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */ > - >; > - }; > - > - wkup_gpio_pins_default: wkup-gpio-pins-default { > - pinctrl-single,pins = < > - J721E_WKUP_IOPAD(0xd8, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */ > - >; > - }; > -}; > - > -&main_pmx0 { > - bootph-pre-ram; > - > - main_uart0_pins_default: main_uart0_pins_default { > - bootph-pre-ram; > - pinctrl-single,pins = < > - J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */ > - J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */ > - J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */ > - J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */ > - >; > - }; > - > - main_i2c0_pins_default: main-i2c0-pins-default { > - bootph-pre-ram; > - pinctrl-single,pins = < > - J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ > - J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ > - >; > - }; > - > - main_mmc1_pins_default: main_mmc1_pins_default { > - pinctrl-single,pins = < > - J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */ > - J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */ > - J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ > - J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */ > - J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */ > - J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */ > - J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */ > - J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */ > - >; > - }; > - > - main_usbss0_pins_default: main_usbss0_pins_default { > - pinctrl-single,pins = < > - J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ > - >; > - }; > -}; > - > -&wkup_uart0 { > bootph-pre-ram; > - pinctrl-names = "default"; > - pinctrl-0 = <&wkup_uart0_pins_default>; > - status = "okay"; > -}; > - > -&mcu_uart0 { > - /delete-property/ power-domains; > - /delete-property/ clocks; > - /delete-property/ clock-names; > - pinctrl-names = "default"; > - pinctrl-0 = <&mcu_uart0_pins_default>; > - status = "okay"; > - clock-frequency = <96000000>; > -}; > - > -&main_uart0 { > - status = "okay"; > - power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; > - pinctrl-names = "default"; > - pinctrl-0 = <&main_uart0_pins_default>; > - status = "okay"; > -}; > - > -&main_sdhci0 { > - /delete-property/ power-domains; > - /delete-property/ assigned-clocks; > - /delete-property/ assigned-clock-parents; > - pinctrl-0 = <&main_mmc1_pins_default>; > - pinctrl-names = "default"; > - clock-names = "clk_xin"; > - clocks = <&clk_200mhz>; > - ti,driver-strength-ohm = <50>; > - non-removable; > - bus-width = <8>; > -}; > - > -&main_sdhci1 { > - /delete-property/ power-domains; > - /delete-property/ assigned-clocks; > - /delete-property/ assigned-clock-parents; > - clock-names = "clk_xin"; > - clocks = <&clk_200mhz>; > - ti,driver-strength-ohm = <50>; > -}; > - > -&wkup_i2c0 { > - bootph-pre-ram; > - lp876441: lp876441@4c { > - compatible = "ti,lp876441"; There is no such driver in linux kernel compatible space. might need a ticket to implement the driver. > - reg = <0x4c>; > - bootph-pre-ram; > - pinctrl-names = "default"; > - pinctrl-0 = <&wkup_i2c0_pins_default>; > - clock-frequency = <400000>; > - > - regulators: regulators { > - bootph-pre-ram; > - buck1_reg: buck1 { > - /*VDD_CPU_AVS_REG*/ > - regulator-name = "buck1"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1250000>; > - regulator-always-on; > - regulator-boot-on; > - bootph-pre-ram; > - }; > - }; > - }; > - > }; > > &wkup_vtm0 { > + compatible = "ti,am654-vtm", "ti,j721e-avs"; &wkup_vtm0 -> there is already stuff coming in from kernel. why do we need to define our own compatible "ti,am654-vtm", "ti,j721e-avs"? there is already compatible = "ti,j7200-vtm"; if we need to fix the driver as part of the series, please do as a path in the series. > vdd-supply-2 = <&buck1_reg>; Should have been handled in kernel please. Please file an internal tracking ticket for this to be handled. > bootph-pre-ram; > }; > - > -&main_i2c0 { > - pinctrl-names = "default"; > - pinctrl-0 = <&main_i2c0_pins_default>; > - clock-frequency = <400000>; > - > - exp1: gpio@20 { > - compatible = "ti,tca6416"; > - reg = <0x20>; > - gpio-controller; > - #gpio-cells = <2>; > - }; > - > - exp2: gpio@22 { > - compatible = "ti,tca6424"; > - reg = <0x22>; > - gpio-controller; > - #gpio-cells = <2>; > - }; > -}; > - > -&usbss0 { > - pinctrl-names = "default"; > - pinctrl-0 = <&main_usbss0_pins_default>; > - ti,vbus-divider; > - ti,usb2-only; > -}; > - > -&usb0 { > - dr_mode = "otg"; > - maximum-speed = "high-speed"; > -}; > - > -&hbmc { > - status = "okay"; > - pinctrl-names = "default"; > - pinctrl-0 = <&mcu_fss0_hpb0_pins_default>; > - reg = <0x0 0x47040000 0x0 0x100>, > - <0x0 0x50000000 0x0 0x8000000>; > - ranges = <0x0 0x0 0x0 0x50000000 0x4000000>, /* 64MB Flash on CS0 */ > - <0x1 0x0 0x0 0x54000000 0x800000>; /* 8MB flash on CS1 */ > - > - flash@0,0 { > - compatible = "cypress,hyperflash", "cfi-flash"; > - reg = <0x0 0x0 0x4000000>; > - }; > -}; > - > -&mcu_ringacc { > - ti,sci = <&dm_tifs>; > -}; > - > -&mcu_udmap { > - ti,sci = <&dm_tifs>; > -}; > -#include "k3-j7200-common-proc-board-u-boot.dtsi" https://gist.github.com/nmenon/662262b0256eab004485035a02ede963 is probably the set of changes I commented about above. > diff --git a/arch/arm/mach-k3/j7200/dev-data.c b/arch/arm/mach-k3/j7200/dev-data.c Split this out as a separate patch. > index 4ddc34210e..8ce6796fd0 100644 > --- a/arch/arm/mach-k3/j7200/dev-data.c > +++ b/arch/arm/mach-k3/j7200/dev-data.c > @@ -46,6 +46,7 @@ static struct ti_lpsc soc_lpsc_list[] = { > > static struct ti_dev soc_dev_list[] = { > PSC_DEV(30, &soc_lpsc_list[0]), > + PSC_DEV(35, &soc_lpsc_list[0]), > PSC_DEV(61, &soc_lpsc_list[1]), > PSC_DEV(90, &soc_lpsc_list[2]), > PSC_DEV(8, &soc_lpsc_list[3]), > -- > 2.34.1 > -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D